Schneider Electric
Schneider Electric RPM11B7 Relay 15 A 24 V AC 5 pin
Plug-in relay switches 15 A at 24 V AC with SPDT contacts and a mechanical flag indicator
- TypeIndustrial Electrical Controls & Automation
- ColorTransparent
- Handles 15 A AC at 250 V for reliable circuit switching
- 15 A DC at 28 V supports low-voltage control panels
- 24 V AC coil enables direct integration with standard automation systems
- Plug-in base with five flat pins allows quick tool-free installation
- Lockable push-to-test button simplifies on-site diagnostics and maintenance
Square 5-pin relay for 24 V AC control circuits
This Schneider Electric RPM11B7 relay switches loads up to 15 A at 250 V AC or 28 V DC through a single-pole double-throw contact. The 24 V AC coil suits low-voltage automation panels and generator control boards. Its enclosed body and mechanical flag indicator simplify status checks during commissioning.
Plug-in mounting with quick-connect terminals
The square base accepts standard 5-pin sockets with 0.19 in flat pins, allowing tool-free insertion and removal. Quick-connect tabs speed up wiring while the lockable push-to-test button lets technicians verify operation without energising the load circuit. The 1.58 in depth fits common DIN-rail socket blocks.
Mechanical flag and lockable test button included
A visible flag shows contact position at a glance, reducing troubleshooting time on generator transfer panels. The lockable push-to-test actuator holds the contacts in the test position for hands-free circuit verification. No separate indicators or test probes are supplied.
Highlights
- Handles 15 A AC at 250 V for reliable circuit switching
- 15 A DC at 28 V supports low-voltage control panels
- 24 V AC coil enables direct integration with standard automation systems
- Plug-in base with five flat pins allows quick tool-free installation
- Lockable push-to-test button simplifies on-site diagnostics and maintenance
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color | Transparent |
Questions about this item
How long will the 15 A contacts last before wear becomes the limiting factor under continuous duty?
The relay is rated 15 A at 250 V AC and 15 A at 28 V DC; contact life depends on load type, switching frequency and environment, so no single hour figure applies.
What temperature rise or coil power draw should I expect when the 24 V AC coil stays energised all day?
The 24 V AC coil draws its rated VA only while energised; the enclosed body measures 1.58 in deep by 1.06 in high by 0.55 in wide, so heat stays localised.
Which socket or DIN-rail base accepts the five 0.19 in flat pins on this plug-in relay?
Use a standard 5-pin square-base socket with 0.19 in flat-pin cavities that matches the 1.58 in by 0.55 in footprint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
