We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric LC1K0610L7 miniature contactor, transparent housing, DIN rail mount, screw terminals

Schneider Electric

Schneider Electric LC1K0610L7 Mini Magnetic Contactor 3 Poles 208V AC 6A

SKU CH-KBP9-A5D2A

A miniature IEC magnetic contactor with three poles, 200-208V AC coil voltage, 6A inductive and 15A resistive ratings, 1NO auxiliary contact, and DIN rail or plate mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Switches inductive loads up to 6 A with 3-pole IEC design
  • Handles resistive currents up to 15 A for versatile circuit control
  • Operates on 200-208 V AC coil voltage for standard industrial supply
  • Mounts on DIN rail or plate for flexible panel installation
  • Uses screw clamp terminals for secure and reliable wiring

Miniature IEC Contactor for 208 V AC Coil Circuits

This Schneider Electric TeSys K contactor provides three power poles rated for 6 A inductive and 15 A resistive loads at a 200-208 V AC coil voltage. It is intended for industrial electrical control and automation panels where a compact, non-reversing switching device is required.

DIN Rail or Plate Mounting with Screw Clamp

The unit measures 2.28 in high by 1.77 in wide and mounts on standard DIN rail or a flat plate, freeing panel space compared with larger NEMA-sized contactors. Screw clamp terminals accept solid or stranded conductors without special tooling, and the single 1NO auxiliary contact supports status feedback or interlock wiring.

Handles Light Motor and Resistive Loads with 6

The contactor comfortably switches small single-phase motors, heating elements or lighting circuits up to its 6 A inductive and 15 A resistive ratings. It is not suited for applications requiring reversing operation, higher inductive currents, or coil voltages outside the 200-208 V AC range.

Highlights

  • Switches inductive loads up to 6 A with 3-pole IEC design
  • Handles resistive currents up to 15 A for versatile circuit control
  • Operates on 200-208 V AC coil voltage for standard industrial supply
  • Mounts on DIN rail or plate for flexible panel installation
  • Uses screw clamp terminals for secure and reliable wiring

Specifications

BrandSchneider Electric
ModelLC1K0610L7
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

At what current level does the 6 A inductive rating become the limiting factor during continuous operation?

The contactor is rated for 6 A inductive full-load current, so sustained loads above that value will exceed its design limit.

How much heat is produced and how loud is the coil when the contactor runs all day at 208 V AC?

The 200-208 V AC coil draws only a few watts, generating minimal heat and operating silently in typical panel installations.

Which mounting hardware and screw-clamp wiring must already be in place for this 3-pole unit to install and operate?

A DIN rail or mounting plate plus screw-clamp terminal wiring for three power poles and one 1NO auxiliary contact are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.