We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent miniature magnetic contactor with screw terminals, compact rectangular form

Schneider Electric

Schneider Electric LC1K0610G7 IEC Miniature Magnetic Contactor 120V AC 3P 1NO

SKU CH-4WPB-5HVGT

A 120V AC coil contactor with three main contacts and one normally open auxiliary for non-reversing motor control up to 1.3 million cycles

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Non-reversing motor control for simple single-direction applications
  • 120 V AC coil voltage matches common industrial control circuits
  • Three main normally open contacts plus one auxiliary normally open contact
  • Compact 2.4 inch depth fits tight panel spaces
  • Electrical durability tested to approximately 1.3 million cycles

Schneider Electric LC1K0610G7 Contactor

The Schneider Electric LC1K0610G7 is an IEC miniature magnetic contactor designed for non-reversing motor control applications. It operates on a 120V AC coil voltage and provides three normally open main contacts with a single normally open auxiliary contact. The unit uses screw clamp terminals for secure wiring connections.

Industrial motor control installations

This contactor suits panels requiring a compact non-reversing starter with a 2.4 inch depth for tight DIN rail or plate mounting. It is not for systems needing reversing capability or auxiliary contacts beyond the single 1NO configuration provided.

120V AC coil voltage

The contactor functions within a control circuit voltage range of 0.8 to 1.15 Uc and a drop-out range of 0.2 to 0.75 Uc, both measured at 50 degrees Celsius. Verify your supply stays within these limits before specifying this part.

Highlights

  • Non-reversing motor control for simple single-direction applications
  • 120 V AC coil voltage matches common industrial control circuits
  • Three main normally open contacts plus one auxiliary normally open contact
  • Compact 2.4 inch depth fits tight panel spaces
  • Electrical durability tested to approximately 1.3 million cycles

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What DIN rail or plate dimensions does the 2.4 inch deep contactor require for mounting?

The contactor mounts on standard DIN rail or plate; its 2.4 inch depth fits tight enclosures.

Which screw clamp terminals accept the 120V AC coil and three main power wires during installation?

Connect the 120V AC coil to the A1/A2 terminals and the three-phase supply to the three main power terminals using the screw clamps.

After roughly 1.3 million operating cycles, which components typically need replacement?

The main contacts and coil are the wear items; plan replacement when electrical durability approaches 1.3 million cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.