Schneider Electric
Schneider Electric Joystick Operator 22mm
A 22mm joystick operator with two maintained directions and one normally open contact per position, supplied complete with a contact block and rated for NEMA 1, 2, 3, 4, 4X, 12 and 13 environments
- Two-direction control for precise positioning
- Maintained operator stays in selected position
- One normally open contact per direction
- 22mm mounting fits standard panel cut-outs
- UL Listed, CSA Certified and CE Certified
Schneider Electric 22mm Joystick Operator
This Schneider Electric joystick operator mounts in a standard 22mm panel cut-out and provides two-direction control with a maintained action. Each direction operates one normally open contact, giving a simple on-off signal per axis. The unit ships complete with its contact block for fast installation. It carries UL, CSA and CE certifications and meets IEC standards.
Two-direction control with maintained positions
The operator handles basic directional tasks such as up-down or left-right selection where the lever stays in the chosen position until moved again. One normally open contact per direction supplies a single switching point per axis. It is not suited for momentary return-to-centre applications or for systems that require more than two discrete positions or multiple contacts per direction.
Replaces individual push-button pairs
Builders upgrading from separate push buttons gain a single compact device that reduces panel space and wiring effort. The jump is worthwhile when a maintained two-axis function is needed and the NEMA 1, 2, 3, 4, 4X, 12, 13 environmental ratings match the enclosure requirements. It does not fit applications needing three or more directions or momentary spring-return action.
Highlights
- Two-direction control for precise positioning
- Maintained operator stays in selected position
- One normally open contact per direction
- 22mm mounting fits standard panel cut-outs
- UL Listed, CSA Certified and CE Certified
Specifications
| Brand | Schneider Electric |
|---|
Questions about this item
Will the 22mm cut-out match the existing panel holes on my older control enclosure?
Yes, the operator is designed for a standard 22mm mounting hole, so it fits the same cut-out used by many legacy push-button and selector switches.
How can I verify the maintained positions are functioning correctly after wiring the 1NO contacts?
Move the joystick to each of the two directions; the corresponding normally open contact should close and stay closed while the handle is held in that position, opening only when released to centre.
Does the package include the contact block or must I order it separately?
The unit is supplied as a complete assembly with the contact block already fitted, so no separate contact-block purchase is required for installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
