We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular IEC control relay with screw terminals and DIN rail mounting clips

Schneider Electric

Schneider Electric CAD32T7 IEC Control Relay 10 A 480 V AC 3NO/2NC

SKU CH-Y0TV-C3JAE

IEC control relay with 3NO/2NC contacts rated 10 A at 480 V AC, DIN-rail or surface mount, 8 VA coil consumption

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable switching for 10 A AC loads up to 600 V
  • IEC-standard relay fits TeSys D systems with 3NO/2NC contacts
  • Coil runs on 480 V AC at 50/60 Hz for industrial panels
  • Screw-clamp terminals allow secure DIN-rail or surface mounting
  • IP2X-rated body stays cool at 140 °F maximum temperature

IEC Control Relay for 10 A circuits

This Schneider Electric CAD32T7 is an IEC control relay rated for 10 A at 480 V AC. It suits electricians and panel builders who need reliable switching in industrial automation cabinets. The unit provides three normally open and two normally closed contacts in a compact housing. It mounts on DIN rail or a flat surface for flexible installation.

Coil voltage and contact ratings set the limits

The coil operates at 480 V AC with a power draw of 8 VA on 50 or 60 Hz supplies. AC contacts handle 10 A at 120, 240, 480 and 600 V, while DC contacts manage 2 A at 125, 250 and 600 V. IP2X rating means fingers are protected but dust and water ingress are not sealed. Maximum operating temperature reaches 140 degrees F.

Screw-clamp wiring on DIN rail or panel

Electrical connections use screw-clamp terminals that accept standard ferrules or stripped wire. The relay body measures 1.77 in wide, 3.03 in high and 3.31 in deep, so allow that space in the enclosure. It is compatible with TeSys D series accessories for expanded functionality. Ensure the coil voltage matches the control circuit before energising.

Highlights

  • Reliable switching for 10 A AC loads up to 600 V
  • IEC-standard relay fits TeSys D systems with 3NO/2NC contacts
  • Coil runs on 480 V AC at 50/60 Hz for industrial panels
  • Screw-clamp terminals allow secure DIN-rail or surface mounting
  • IP2X-rated body stays cool at 140 °F maximum temperature

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I pick the 10 A AC version or the 2 A DC version for my circuit?

Choose based on your load type — the relay handles 10 A at 120/240/480/600 V AC and 2 A at 125/250/600 V DC, so match the rating to whether your circuit runs on AC or DC.

What does the 10 A rating mean when the relay is mounted on a DIN rail inside a panel?

It means the contacts can continuously switch up to 10 A at 480 V AC (or 120/240/600 V AC) while the coil draws 8 VA at 480 V AC, 50/60 Hz, within the 140 °F maximum operating temperature.

The screw-clamp terminals are rated for 480 V AC — what does that cap in practice?

The 480 V AC coil voltage and 600 V AC/DC contact ratings set the maximum system voltage you can connect; the IP2X screw clamps accept wire sizes suited for those voltages on a DIN-rail or surface mount.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.