We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric Altivar VFD compact unit light grey finish

Schneider Electric

Schneider Electric ATV12H075F1 1 HP 115V VFD 7.500

SKU CH-X2QG-E5JWM

Single-phase 115 V input drive delivers three-phase 200–240 V output up to 1 hp and 4.2 A for motor speed control

  • Length7.500
  • TypeBuilding Cable
  • Single-phase 115 V input simplifies installation
  • Three-phase 200–240 V output drives standard motors
  • 5–400 Hz range covers wide speed control
  • 1 hp / 4.2 A rating matches typical light loads
  • NEMA 1 enclosure suits indoor environments

Schneider Electric ATV12H075F1 Drive

The Schneider Electric ATV12H075F1 is a variable frequency drive rated at 1 hp for single-phase 115V supply. It converts the input to three-phase 200 to 240V AC output for motor control applications. The unit carries a NEMA 1 enclosure rating for indoor mounting.

Installation notes and common issues

Wiring requires a single-phase AC source at 50 or 60 Hz with input voltage between 100 and 120V. Output delivers three-phase power at up to 4.2 A across a 0.5 to 400 Hz range. Incorrect phase connection or exceeding the 1 hp rating typically causes tripping or damage.

Suitability and alternatives

This drive suits installers needing a compact 1 hp VFD for 115V single-phase mains feeding a three-phase motor. It is not for buyers who need higher horsepower, three-phase input, or an enclosure rated for outdoor or wash-down environments.

Highlights

  • Single-phase 115 V input simplifies installation
  • Three-phase 200–240 V output drives standard motors
  • 5–400 Hz range covers wide speed control
  • 1 hp / 4.2 A rating matches typical light loads
  • NEMA 1 enclosure suits indoor environments

Specifications

BrandSCHNEIDER ELECTRIC
Length7.500
TypeBuilding Cable

Questions about this item

How can I verify the drive is running correctly after wiring it to a 115 V single-phase supply?

Apply power and confirm the keypad shows a ready state; the display should read 0.5 Hz at minimum speed and ramp up to 400 Hz at full command while output current stays below 4.2 A.

What ships with the ATV12H075F1 and what must I source separately?

The variable speed drive unit is included; you must supply your own 100–120 V AC single-phase feed, three-phase motor cables rated for 200–240 V output, and any required mounting hardware for the NEMA 1 enclosure.

Which capacity should I select for a 1 hp motor on a 115 V line?

Choose this 1 hp, 4.2 A model; it is rated for 115 V single-phase input and delivers three-phase 200–240 V output up to 400 Hz, matching a 1 hp motor requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.