Schneider Electric
Schneider Electric ATS01N232RT soft starter 440-480 V AC 32 A 3-phase
Soft starts three-phase motors up to 20 hp at 460-480 V AC with 32 A output and 24 V DC control in an IP20 NEMA 1 enclosure
- Soft-starts motors to reduce mechanical stress
- Handles 32 A output current for 20 hp loads
- Operates on 440–480 V AC three-phase supply
- Controlled by safe 24 V DC signal
- IP20 NEMA 1 enclosure suits indoor panels
Industrial motor soft starter 32 A
The Schneider Electric ATS01N232RT is a soft starter rated for 32 A output current on three-phase supplies between 440 V and 480 V AC. It is designed for industrial and commercial motor circuits where controlled acceleration reduces mechanical stress and current peaks during start-up.
Panel-mount unit with 24 V DC control
The device mounts in an IP20 NEMA 1 enclosure and requires a 24 V DC control voltage supply for its internal logic. It accepts a 460 V to 480 V AC line input and delivers the same voltage range to the motor, freeing the installer from external voltage-transformation steps for the power circuit.
20 hp three-phase capacity at 460-480 V AC
At the rated voltage window the starter comfortably handles motors up to 20 hp, providing smooth torque ramp-up for typical pump, fan and conveyor loads. Applications that exceed 32 A or require higher horsepower will need a larger frame or alternative starting method.
Highlights
- Soft-starts motors to reduce mechanical stress
- Handles 32 A output current for 20 hp loads
- Operates on 440–480 V AC three-phase supply
- Controlled by safe 24 V DC signal
- IP20 NEMA 1 enclosure suits indoor panels
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
What is the maximum motor horsepower this soft starter can handle at 460-480 V AC?
It is rated for a 20 hp motor at three-phase 460 to 480 V AC.
How much heat must the enclosure dissipate when the unit runs continuously at 32 A?
The IP20 NEMA 1 enclosure relies on natural convection; ensure the cabinet provides adequate airflow for the 32 A load.
What control voltage supply is required to operate the starter?
A 24 V DC control supply is needed to energise the control circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
