Schneider Electric
Schneider Electric ATS01N232LU 32 A soft start 208-230 V 3-phase
A 32 A soft starter for three-phase motors rated up to 10 hp at 208-230 V AC with 24 V DC control and IP20 protection
- Reduces motor inrush current with 32 A soft start
- Handles 10 hp three-phase loads at 200-240 V AC
- Operates on 24 V DC control voltage for safe integration
- IP20 NEMA 1 enclosure protects internal components
- Supports 200-240 V AC input and output voltage range
Schneider Electric 32 A Soft Starter
The Schneider Electric ATS01N232LU soft starter controls three-phase motor starts at 32 A output current. It accepts 200 to 240 V AC input and delivers the same voltage range to the motor. Rated for 10 hp at three-phase 200 to 240 V AC, it operates on 24 V DC control voltage.
IP20 NEMA 1 enclosure for indoor panels
The IP20 NEMA 1 rating suits installation inside enclosed electrical cabinets. It does not suit environments that require higher ingress protection or outdoor exposure. Buyers needing a weatherproof or washdown-rated enclosure should look at a different model.
32 A output current rating
The single specification that decides fit is the 32 A output current. The motor full-load current must not exceed this value. Verify the motor nameplate amperage against the 32 A limit before purchasing.
Highlights
- Reduces motor inrush current with 32 A soft start
- Handles 10 hp three-phase loads at 200-240 V AC
- Operates on 24 V DC control voltage for safe integration
- IP20 NEMA 1 enclosure protects internal components
- Supports 200-240 V AC input and output voltage range
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
What enclosure rating and mounting style does the ATS01N232LU soft starter require?
It is rated IP20 and NEMA 1, so it must be installed inside a protected enclosure on a standard mounting rail or panel.
Which control voltage must be supplied to the ATS01N232LU for it to start and stop the motor?
Apply 24 V DC to the control terminals; the starter will not operate without this separate low-voltage supply.
What routine check or replacement should be planned for the ATS01N232LU over time?
Periodically verify that power and control terminals remain tight and that the enclosure ventilation keeps the IP20 unit free of dust buildup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
