We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Schneider Electric

Schneider Electric ATS01N209LU Soft Starter 9 A 200-240 V AC 2 HP

SKU CH-VHWN-NYW07

Soft-starts single-phase motors up to 2 hp at 200-240 V AC with a 9 A output rating

  • Smooth motor start-up with 9 A soft starter
  • Handles 2 HP three-phase loads at 200-240 V AC
  • Wide control voltage range from 110 to 240 V AC
  • IP00 open chassis suits NEMA 1 enclosure mounting
  • Schneider Electric reliability for industrial circuit protection

Soft starter for 2 HP motors

The Schneider Electric ATS01N209LU provides controlled start-up for three-phase motors rated at 2 hp and 9 A. It accepts a mains supply between 200 and 240 V AC and a separate control voltage from 110 to 240 V AC. The unit is IP00 rated and fits NEMA 1 enclosures.

Installers needing simple ramp-up

This soft starter suits applications where a direct-on-line start creates excessive torque or current surge. It is not intended for systems requiring integrated bypass contactors, advanced motor protection curves or communication interfaces. Buyers needing higher current ratings or different voltage classes should select another model.

9 A output current at 200-240 V AC

The 9 A rating at 200 to 240 V AC three-phase determines whether the starter matches the motor nameplate. Verify the motor full-load current does not exceed this value before specifying the device.

Highlights

  • Smooth motor start-up with 9 A soft starter
  • Handles 2 HP three-phase loads at 200-240 V AC
  • Wide control voltage range from 110 to 240 V AC
  • IP00 open chassis suits NEMA 1 enclosure mounting
  • Schneider Electric reliability for industrial circuit protection

Specifications

BrandSCHNEIDER ELECTRIC

Questions about this item

What maintenance will the ATS01N209LU soft starter need over time?

The unit has no user-serviceable parts; periodic visual inspection of the IP00 terminals and tightening of connections is the only recommended upkeep.

Which limit appears first when the soft starter runs continuously at full load?

The 9 A output current rating is the primary limit; sustained operation above this value will trigger the internal protection.

How much heat or noise does the ATS01N209LU produce during all-day operation?

With no internal fan and an IP00 enclosure, the device runs silently and dissipates heat through its baseplate; external ventilation is required for continuous duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.