Schneider Electric
Schneider Electric 9001KM38LG 30mm 120V Green LED Lamp Module
A 30 mm green LED indicator module rated for 120 V AC/DC with screw-clamp terminals and NEMA 1, 2, 3, 4, 4X, 12, 13 ratings
- Engine BrandSCHNEIDER ELECTRIC
- Engine Size30 mm
- Green LED visibility for clear status indication
- 120 V AC/DC operation suits standard industrial control circuits
- 30 mm mounting fits common panel cut-outs
- Screw-clamp terminals enable secure wiring without special tools
- NEMA 1, 2, 3, 4, 4X, 12, 13 ratings protect against dust and water ingress
Schneider Electric 30 mm Green LED Lamp Module
The Schneider Electric 9001KM38LG is a 30 mm full-voltage lamp module with a green LED rated for 120 V AC or DC. It carries NEMA type 1, 2, 3, 4, 4X, 12 and 13 ratings and meets CSA C22.2 No. 14, UL 508 and EN/IEC 60947 standards for industrial control panels.
Suited for panel builders replacing indicator
Installers needing a different voltage, colour or a smaller cut-out size will not find a match here. The screw-clamp terminals accept standard wiring but the module does not suit panels requiring IP-rated sealing beyond the listed NEMA types.
Ships as a single replacement lamp module
No mounting hardware, legend plates or wiring accessories are included in the package. The unit is a direct drop-in for part number 65088-052-12 and requires no additional software or configuration.
Highlights
- Green LED visibility for clear status indication
- 120 V AC/DC operation suits standard industrial control circuits
- 30 mm mounting fits common panel cut-outs
- Screw-clamp terminals enable secure wiring without special tools
- NEMA 1, 2, 3, 4, 4X, 12, 13 ratings protect against dust and water ingress
Specifications
| Engine Brand | SCHNEIDER ELECTRIC |
|---|---|
| Engine Size | 30 mm |
Questions about this item
Which pilot-light body or control station accepts this 30 mm full-voltage module?
Any Schneider Electric 30 mm operator or push-button station designed for full-voltage lamp modules will accept the 9001KM38LG.
Can I swap this green LED into an existing 120 V AC/DC incandescent socket without rewiring?
Yes, the screw-clamp terminals and 120 V AC/DC rating match the original incandescent module, so the existing wiring remains valid.
How do I confirm the module is operating correctly once installed?
Apply 120 V AC or DC; the green LED should illuminate steadily, indicating the full-voltage circuit and lamp are functional.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
