Schneider Electric
Schneider Electric 9001K71H7 30 mm industrial joystick operator 2-position metal
A 30 mm metal joystick operator with two momentary positions and IP66 sealing for industrial control panels
- Engine BrandSCHNEIDER ELECTRIC
- Engine Size30 mm
- 30 mm metal joystick fits standard industrial panels
- Two-position momentary action gives precise directional control
- 10 A at 250 V AC rating handles demanding circuits
- IP66 and NEMA 1, 12, 13, 2, 3, 3R, 4 sealing resists harsh environments
- Chromium-plated bezel adds corrosion resistance and durability
Industrial joystick operator for 30 mm panels
The Schneider Electric 9001K71H7 is a 30 mm metal joystick operator built for industrial control panels. It provides two momentary positions with vertical operation and a chromium-plated metal bezel. The unit carries NEMA 1, 2, 3, 3R, 4, 12, 13 and IP66 ratings for demanding environments.
Sustained load behaviour with 10 A contacts
Each of the two normally open contacts is rated for 10 A at 250 V AC under the A600/Q600 designation. The momentary action returns to centre when released, so the contacts only carry current during active deflection. Metal construction and the sealed ratings help maintain performance during repeated industrial cycles.
Panel mounting with 30 mm cutout
Installation requires a standard 30 mm panel cutout for the metal operator body. The non-latching mechanism means the handle springs back automatically, reducing mechanical wear. Buyers who need maintained positions or more than two directions should select a different operator type.
Highlights
- 30 mm metal joystick fits standard industrial panels
- Two-position momentary action gives precise directional control
- 10 A at 250 V AC rating handles demanding circuits
- IP66 and NEMA 1, 12, 13, 2, 3, 3R, 4 sealing resists harsh environments
- Chromium-plated bezel adds corrosion resistance and durability
Specifications
| Engine Brand | SCHNEIDER ELECTRIC |
|---|---|
| Engine Size | 30 mm |
Questions about this item
How much heat does the 9001K71H7 generate when operated continuously at its 10 A rating?
The joystick operator is a passive switching device; it produces no measurable heat of its own during continuous operation.
What external contacts or wiring must I already have to install this 30 mm metal joystick?
You need a control circuit rated for 10 A at 250 V AC (A600/Q600) and a 30 mm panel cut-out with chromium-plated bezel clearance.
Will the IP66-rated 9001K71H7 mount directly onto my existing NEMA 4 enclosure?
Yes — it carries NEMA 1, 2, 3, 3R, 4, 12 and 13 ratings, so it seals correctly on a NEMA 4 enclosure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
