Sangoma Technologies Corporation
Sangoma Technologies Corporation VEGA-100-030KIT VoIP gateway 30 calls
Connects digital telephony equipment to IP networks with a fixed capacity of 30 simultaneous VoIP calls, dual gigabit Ethernet connections, local survivability during WAN failures.
- Fixed 30 simultaneous VoIP calls out of the box
- Dual gigabit Ethernet ports for redundant IP connectivity
- Local survivability keeps internal calls alive during WAN outages
- Each E1/T1 port independently set as network or terminal side
- Flexible call routing enables fallback and least-cost options
Fixed 30-Call VoIP Gateway
The Sangoma Vega 100G is a single E1/T1 digital gateway factory-configured for 30 simultaneous VoIP calls. It connects legacy telephony equipment to IP networks for businesses migrating to SIP trunking. The unit ships with a fixed capacity that cannot be expanded beyond the 30-call limit. Dual gigabit Ethernet ports provide redundant network connectivity.
Replaces ISDN PRI Trunks
This gateway replaces traditional ISDN PRI circuits by converting E1/T1 signalling to SIP for IP PBX integration. The jump is worthwhile when an organisation wants to eliminate recurring PSTN line rental while keeping existing handsets and PBX hardware. Each interface can be independently set as network or terminal side, allowing connection to either a PBX or the public network. Emergency PSTN backup maintains outbound dialling during WAN outages.
Limited to 30 Concurrent Calls
The hard cap of 30 simultaneous calls cannot be increased by licensing or hardware modules. Buyers who need more capacity must deploy additional gateways. Survivability features such as local call switching and SRES resilience require compatible Sangoma infrastructure. SNAP provisioning simplifies deployment but ties management to the vendor ecosystem. Supported signalling includes ETSI, VN4, NI1, NI2, 5ESS, DMS100, QSIG and CAS R2 MFC.
Highlights
- Fixed 30 simultaneous VoIP calls out of the box
- Dual gigabit Ethernet ports for redundant IP connectivity
- Local survivability keeps internal calls alive during WAN outages
- Each E1/T1 port independently set as network or terminal side
- Flexible call routing enables fallback and least-cost options
Specifications
No published specifications for this item yet.
Questions about this item
What rack space and power connection does the Vega 100G Single E1/T1 Digital Gateway require?
The unit is a 1U rack-mount appliance with dual Gigabit Ethernet ports and a single E1/T1 port; it ships with a standard IEC power cord for mains connection.
Which configuration step is most often missed when commissioning the Vega 100G gateway?
Each E1/T1 interface must be explicitly set to network-side or terminal-side mode to match the attached PBX or PSTN line; the gateway does not auto-detect this setting.
When will the fixed 30-call capacity licence need to be replaced or upgraded?
The 30 simultaneous-call licence is factory-set and cannot be expanded; a replacement gateway is required if capacity beyond 30 calls is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



