Sakrete
Sakrete 120034 Flo-Coat Concrete Resurfacer Gray Pail
Polymer-modified cement mix resurfaces concrete from 1/8 to 1/4 inch depth using a squeegee or trowel
- TypeCaulks
- Color/FinishGray
- Polymer-modified mix resurfaces worn concrete from 1/8 to 1/4 inch depth
- Flowable consistency allows quick squeegee application over large areas
- Stiffer trowel consistency fills deeper imperfections and vertical edges
- Gray finish blends with existing concrete for uniform appearance
- Sakrete brand trusted by professionals for durable concrete repairs
Concrete resurfacer for shallow repairs
Sakrete Flo-Coat is a polymer-modified sand and cement mix designed to resurface existing concrete from 1/8 inch to 1/4 inch depth. It suits homeowners and contractors who need to restore worn or spalled slabs without full replacement. The product ships in a gray pail ready for mixing.
Replaces full-depth patching or slab replacement
Instead of removing and repouring thick sections, this resurfacer overlays sound concrete at the stated thin depths. The jump is worth it when the substrate is structurally solid but the surface is pitted, scaled or discoloured. Deeper damage still requires a structural repair mortar before any overlay.
Limited to thin overlays on sound substrates
The material cannot bridge large voids, span cracks wider than a hairline or adhere to unsound, oily or frozen concrete. It must be applied within the 1/8 inch to 1/4 inch window; thicker builds risk delamination. Proper surface preparation and curing are essential for durability.
Highlights
- Polymer-modified mix resurfaces worn concrete from 1/8 to 1/4 inch depth
- Flowable consistency allows quick squeegee application over large areas
- Stiffer trowel consistency fills deeper imperfections and vertical edges
- Gray finish blends with existing concrete for uniform appearance
- Sakrete brand trusted by professionals for durable concrete repairs
Specifications
| Type | Caulks |
|---|---|
| Color/Finish | Gray |
| Brand | Sakrete |
Questions about this item
What depth of existing concrete can the 120034 Flo-Coat resurfacer cover?
It resurfaces worn concrete from 1/8 inch up to 1/4 inch deep, filling spalls and surface wear in a single application.
How do I apply the polymer-modified mix without it slumping or drying too fast?
Mix to a flowable consistency for squeegee work or a stiffer consistency for troweling; apply in shade, dampen the substrate first, and finish before the surface skins over.
When will the gray resurfaced area need recoating or patching again?
The cement-based overlay lasts for years under normal traffic; inspect annually and spot-repair any new cracks with the same Flo-Coat mix.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
