Sajhotelc ZK-001 9-piece hole saw kit 32-76mm pneumatic accessory
Cuts 32 to 76 mm holes in soft wood, PVC and plywood with six carbon-steel saws, mandrel, arbor and spare bit in a sturdy case
- MaterialSteel
- Compatibility/FitmentElectric drills, Impact drills
- Selling UnitTraditional, 9
- Color/FinishRed
- FeaturesTraditional
- Item Count9, Traditional
- Complete 9-piece kit covers 32 mm to 76 mm holes
- Heat-treated carbon steel teeth cut fast and stay sharp
- Works with electric drills and impact drills for versatile use
- Protective gloves and arbor included for safer operation
- 25 mm maximum cutting depth suits wood and PVC boards
Kit contents and target user
The Sajhotelc ZK-001 provides an 11-piece hole saw kit covering diameters from 32mm to 76mm. It is aimed at DIY enthusiasts and tradespeople who need to cut clean holes in soft wood, PVC board or plywood using a standard electric or impact drill.
Build quality and daily use
Heat-treated carbon steel with an anti-rust coating forms the saw bodies, while sharp teeth lower cutting resistance for smoother progress. The set includes a mandrel, drill rod, hex wrench, spare drill bit and protective gloves, all organised in a sturdy hanging case for quick access on site.
Deciding specification
Maximum cutting depth is 25mm, so the kit suits sheet goods and thin timber but cannot bore through thick joists or solid hardwood. The saws are explicitly not rated for metal or hard wood, ruling out those applications entirely.
Highlights
- Complete 9-piece kit covers 32 mm to 76 mm holes
- Heat-treated carbon steel teeth cut fast and stay sharp
- Works with electric drills and impact drills for versatile use
- Protective gloves and arbor included for safer operation
- 25 mm maximum cutting depth suits wood and PVC boards
Specifications
| Brand | Sajhotelc |
|---|---|
| Model | ZK-001 |
| Material | Steel |
| Compatibility/Fitment | Electric drills, Impact drills |
| Selling Unit | Traditional, 9 |
| Color/Finish | Red |
| Features | Traditional |
| Item Count | 9, Traditional |
| Commercial/Residential | Traditional |
| Part Number | ZK-001 |
Questions about this item
What shank interface do the mandrel and drill rod use, and what chuck size does that limit me to?
The kit includes a mandrel and drill rod built for standard electric drills and impact drills, so the shank must fit whatever chuck your drill accepts.
What are the exact diameters of the six hole saws in the set?
The six saws measure 32 mm, 38 mm, 44 mm, 54 mm, 64 mm and 76 mm.
How do I assemble the mandrel, drill rod and hole saw, and which step is most often missed?
Insert the drill rod into the drill chuck, thread the mandrel onto the rod, mount the chosen hole saw onto the mandrel arbor, and tighten with the hex wrench; the step most often missed is fully tightening the mandrel onto the drill rod before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
