SAFT
SAFT LS14500 AA 3.6V 2600mAh Lithium Battery 8-Pack
Eight 3.6 V AA lithium thionyl chloride cells deliver 2600 mAh capacity and operate from -60 °C to +85 °C
- Battery TypeAA
- Reliable power for up to 25 years production experience
- Stable 3.6V output across most of the battery lifetime
- Operates from -60°C to +85°C in harsh environments
- Less than 1% self-discharge per year at +20°C storage
- UL approved safety with hermetic glass-to-metal sealing
Eight-cell professional power pack
This eight-piece set supplies SAFT LS14500 AA cells rated at 3.6 volts and 2600 milliampere-hours each. The lithium thionyl chloride chemistry suits utility metering, security sensors and industrial data loggers that demand multi-year service intervals. Buyers needing rechargeable cells or standard 1.5-volt alkaline output should choose a different chemistry.
Wide-temperature stability
The bobbin construction with hermetic glass-to-metal sealing keeps voltage stable across a minus sixty to plus eighty-five degree Celsius range. Self-discharge stays below one percent per year at twenty degrees Celsius, so stored spares remain ready for up to twenty-five years. Pulse loads up to two hundred milliamperes are supported without voltage collapse.
Compact AA form factor with safety certifications
Each cell measures fourteen point five millimetres in diameter by fifty point five millimetres in height and weighs nineteen grams. The non-flammable, non-pressurised electrolyte and UL approval under BBCV2 MH30127 simplify transport and regulatory compliance. The corrosive electrolyte requires correct polarity handling and prevents use in devices expecting standard alkaline dimensions or voltage.
Highlights
- Reliable power for up to 25 years production experience
- Stable 3.6V output across most of the battery lifetime
- Operates from -60°C to +85°C in harsh environments
- Less than 1% self-discharge per year at +20°C storage
- UL approved safety with hermetic glass-to-metal sealing
Specifications
| Battery Type | AA |
|---|
Questions about this item
How do I install the LS14500 AA 3.6V lithium batteries, and what polarity mistake should I avoid?
Insert each cell with the positive button toward the device's + contact and the flat negative end toward the − contact; reversing them can damage the 3.6V lithium thionyl chloride chemistry.
What maintenance or replacement will the 8-pack LS14500 batteries need over time?
No recharging or periodic maintenance is required; the non-flammable electrolyte and hermetic glass-to-metal seal give a low self-discharge rate under 1% per year at 20°C, so replacement occurs only when the 2600mAh capacity is depleted.
What limit appears first when the LS14500 cells run under continuous load?
The pulse capability is typically up to 200mA; sustained current above that level will cause voltage drop and capacity loss before the -60°C to +85°C temperature limits are reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



