Safety Technology International
Safety Technology International SS2109EX-EN Emergency Exit Push Button
An emergency exit push button with turn-to-reset latching action, polycarbonate construction and a 10 A SPDT relay rated for 125 or 250 V AC and 30 V DC
- TypeIndustrial Electrical Controls & Automation
- Color MappingGreen
- Turn-to-reset action simplifies emergency release
- 10 A at 125 or 250 V AC handles high loads
- SPDT relay output integrates with access control
- Operates from -40 to 250 °F in harsh environments
- UL and cUL listed for code compliance
Emergency Exit Push Button
The Safety Technology International SS2109EX-EN is a latching emergency exit push button designed for access control and emergency systems. It features a turn-to-reset mechanism with a red button on a green polycarbonate housing. The unit carries UL and cUL listings for safety compliance.
Panel Mounting For Control Integration
This device mounts into a standard panel cutout to provide a manual release point for secured doors or emergency circuits. Its SPDT relay output interfaces directly with access control panels or alarm systems. The painted polycarbonate construction suits indoor or covered outdoor installations.
Sustained Load Current Handling
The switch is rated for 10 amps at 125 or 250 volts AC and 6 amps at 30 volts DC continuous duty. It maintains contact integrity across an operating range of minus 40 to 250 degrees Fahrenheit. The latching action holds the circuit state until the button is manually turned to reset.
Highlights
- Turn-to-reset action simplifies emergency release
- 10 A at 125 or 250 V AC handles high loads
- SPDT relay output integrates with access control
- Operates from -40 to 250 °F in harsh environments
- UL and cUL listed for code compliance
Specifications
| Brand | SAFETY TECHNOLOGY INTERNATIONAL |
|---|---|
| Type | Industrial Electrical Controls & Automation |
| Color Mapping | Green |
Questions about this item
What is the maximum continuous current the relay contacts can carry at mains voltage?
The relay is rated for 10 A at 125 or 250 V AC under continuous operation.
How much heat does the unit generate when the button is held in the latched position all day?
Power dissipation is limited to the contact resistance of the 10 A relay; the housing is rated for an ambient range of -40 to 250 °F.
Which wiring terminals must be present on the control panel for this button to connect?
The switch provides a single SPDT relay output that requires three wires — common, normally open and normally closed — at the panel terminal block.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
