Sabrent
Sabrent CB-3010 USB 3.0 extension cable 10 ft 22AWG black A-Male to A-Female
A 10 ft USB 3.0 extension cable with 22AWG conductors and shielding extends connections to hard drives, hubs, mice, keyboards.
- TypeUSB 3.0
- Connector TypeUSB 3.0 Extension Cable
- ColorBlack
- Cable Length10 ft.
- Connector Number2
- Terminal GenderMale to Female
- Extends USB reach by 10 ft for flexible device placement
- 22AWG conductors and shielding deliver up to 5 Gbps SuperSpeed transfers
- Backward compatible with USB 2.0 peripherals including drives, hubs and printers
- Male-to-female A connectors add a port without replacing existing cables
- Black 10 ft length suits desktop, laptop and Windows tablet setups
Extension length and connector type
This ten-foot USB 3.0 extension cable uses a male-to-female Type-A configuration. It lets you move a peripheral up to three metres away from a computer or Windows tablet without replacing the device's own lead. The 22AWG conductors support both USB 3.0 and USB 2.0 hardware such as hard drives, hubs, keyboards, mice, flash drives and printers.
Shielding and backward compatibility
Integrated shielding reduces electromagnetic and radio-frequency interference to preserve signal quality over the full length. The cable delivers SuperSpeed transfer rates up to 5 Gbps while remaining fully compatible with existing USB 2.0 equipment. No driver installation is required on supported Windows systems.
When the extra reach matters
The extension replaces a short or fixed device cable when the host port is inconveniently located or when routing behind furniture is needed. It is not suited for situations that require a different connector gender, a shorter run or a non-Type-A interface.
Highlights
- Extends USB reach by 10 ft for flexible device placement
- 22AWG conductors and shielding deliver up to 5 Gbps SuperSpeed transfers
- Backward compatible with USB 2.0 peripherals including drives, hubs and printers
- Male-to-female A connectors add a port without replacing existing cables
- Black 10 ft length suits desktop, laptop and Windows tablet setups
Specifications
| Brand | SABRENT |
|---|---|
| Model | CB-3010 |
| Type | USB 3.0 |
| Connector Type | USB 3.0 Extension Cable |
| Color | Black |
| Cable Length | 10 ft. |
| Connector Number | 2 |
| Terminal Gender | Male to Female |
| Features | High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices Enjoy SuperSpeed USB 3.0 data transfer rate at up to 5 Gbps, 10x faster than USB 2.0 Features shielding that provides protection against noise from electromagnetic and radio-frequency signals, keeping your signal clear w |
Questions about this item
How do I install the Sabrent CB-3010 10 ft USB 3.0 extension cable without losing SuperSpeed performance?
Connect the A-Male plug directly into the host's USB 3.0 port and the peripheral into the A-Female end; routing the 22AWG cable near power bricks often causes the first signal drop.
What maintenance or replacement will the Sabrent CB-3010 22AWG cable need over time?
Inspect the shielding braid and connector hoods for wear after frequent flexing; replace the cable if the 10 ft length develops intermittent disconnects on USB 3.0 drives.
What limit appears first on the Sabrent CB-3010 during sustained 5 Gbps transfers?
The 10 ft 22AWG conductors reach their attenuation ceiling before the 5 Gbps spec, so long bulk moves may throttle to USB 2.0 speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


