Rustlick
Rustlick 75051 Cutting Fluid 5 gal Bucket
Five-gallon bucket of cutting fluid for cutting, grinding and sawing operations
- 5-gallon capacity supports extended cutting operations
- Formulated for cutting, grinding and sawing applications
- Yellow-orange colour aids visual level checks
- Pail container enables easy pouring and storage
- Rustlick brand recognised in machine-shop environments
Industrial Cutting Fluid for Machining Operations
Rustlick 75051 is a dedicated grinding coolant formulated for cutting, grinding and sawing tasks in machine-shop environments. The fluid comes in a five-gallon pail ready for direct use in industrial coolant systems.
Thermal Management and Concentration Control
The coolant absorbs heat generated during metal-removal operations to protect tool edges and workpiece surfaces. Its chemistry resists foaming and bacterial growth, reducing sump maintenance and keeping power draw on circulation pumps stable.
Pail Packaging and Shop Integration
The sealed bucket prevents contamination during storage and allows easy pouring or pumping into machine reservoirs. Yellow-orange colour lets operators verify fluid level and condition at a glance without opening the container.
Highlights
- 5-gallon capacity supports extended cutting operations
- Formulated for cutting, grinding and sawing applications
- Yellow-orange colour aids visual level checks
- Pail container enables easy pouring and storage
- Rustlick brand recognised in machine-shop environments
Specifications
| Brand | RUSTLICK |
|---|
Questions about this item
How do I mix the Rustlick 75051 coolant for grinding and sawing, and what dilution mistake should I avoid?
Dilute the concentrate with water to the ratio recommended for your operation; the common error is adding concentrate to water instead of water to concentrate, which can cause poor emulsion stability.
What ongoing maintenance does the 5-gal bucket of Rustlick 75051 require once it is in the machine sump?
Monitor concentration daily with a refractometer, skim tramp oil weekly, and top up with correctly mixed fluid rather than straight water or neat concentrate.
What is the first performance limit I will hit when running Rustlick 75051 continuously in heavy cutting?
Bacterial growth and pH drop typically appear first, leading to odour, reduced rust protection and shorter tool life if the fluid is not regularly tested and treated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
