We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white submersible pump with barbed ports and long cord

Rule

Rule IL280P 12V 4.5A Submersible Pump 1/2" Barbed 5 GPM 32 ft Head 13 ft Cord

SKU CH-V8WD-9QWWD MPN IL280P

Submersible 12 V pump moves 5 GPM water or diesel to 32 ft head with 13 ft cord

  • TypeDrain Components
  • Submersible 12 V DC operation suits marine and portable power systems
  • 5 GPM flow rate moves water quickly for drainage or transfer tasks
  • 32 ft maximum head lifts water to elevated discharge points
  • 13 ft power cord provides flexible placement without extension leads
  • 5 A draw keeps electrical load low on battery circuits

Submersible 12 V Utility Pump

The Rule IL280P is a 12-volt DC submersible pump built for marine and potable water systems. It draws 4.5 amps and delivers a maximum flow of 5 gallons per minute. The unit handles water or diesel up to 176 degrees Fahrenheit and includes a 13-foot power cord with clamp connections.

32-Foot Maximum Head

This pump produces up to 32 feet of head at 7 psi maximum discharge pressure. That single figure determines whether it can overcome the vertical lift and friction loss in your specific plumbing run. If your application requires more head, this model will not meet the demand.

Barbed Half-Inch Connections

Both intake and discharge ports accept half-inch barbed fittings for simple hose installation. The acetal body resists corrosion in freshwater and diesel environments. The pump requires a 12-volt DC supply capable of 4.5 amps and frees you from manual priming thanks to its submersible design.

Highlights

  • Submersible 12 V DC operation suits marine and portable power systems
  • 5 GPM flow rate moves water quickly for drainage or transfer tasks
  • 32 ft maximum head lifts water to elevated discharge points
  • 13 ft power cord provides flexible placement without extension leads
  • 5 A draw keeps electrical load low on battery circuits

Specifications

TypeDrain Components
BrandRule
ModelIL280P

Questions about this item

What does the 5 GPM flow rate mean when the pump is running in a real system?

The pump can move up to 5 gallons per minute at open discharge; actual flow drops as hose length, fittings or head pressure increase.

How does the 12 V DC / 4.5 A electrical interface limit what power sources can be used?

It requires a 12 V DC supply capable of at least 4.5 amps, such as a marine battery or regulated converter; lower-voltage or current-limited sources will not run the motor.

What hose size and mounting clearance does the 1/2-inch barbed connection need?

Use 1/2-inch I.D. hose secured with clamps on both intake and discharge; the submersible body fits through openings large enough for its diameter and rests on the tank bottom.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.