RUCKUS WIRELESS
RUCKUS WIRELESS 901-T750-US51 T750 SE Outdoor Wi-Fi 6 access point
Outdoor Wi-Fi 6 access point with IP-67 weatherproofing, dual 4x4:4 radios, 2.5 GbE and SFP+ backhaul, and PoE output for daisy-chaining devices
- StandardsIEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE
- Frequency Band2.4 GHz, 5 GHz Performance: Maximum data rate (2.4 GHz): 114
- Interface1 x 1000Base-T (PoE+) - RJ-45 ¦ 1 x 1Gb Ethernet/10Gb Ethern
- Power SupplyPower Over Ethernet (PoE) Supported: PoE+ Power Device: Exte
- Max Power ConsumptionPower Consumption Operational: 63.7 Watt
- TemperatureMin Operating Temperature: -40 °F Max Operating Temperature:
- Wi-Fi 6 outdoor access point with IP-67 weatherproofing for reliable operation in harsh conditions
- Dual 4x4:4 radios deliver 1148 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz for high throughput
- Eight spatial streams with MU-MIMO and OFDMA support up to 1024 simultaneous client connections
- Flexible backhaul via SFP+ 1/10 GbE and 2.5 GBase-T PoE+ ports for resilient network design
- PoE+ output port powers attached devices such as IP cameras without extra cabling
Outdoor Wi-Fi 6 Access Point
The RUCKUS T750 SE is an outdoor wireless access point built for high-density public venues such as stadiums, campuses and urban deployments. It delivers dual-concurrent 4x4:4 operation on both 2.4 GHz and 5 GHz bands with a combined maximum rate of 3.5 Gbps. The unit supports up to 1,024 connected clients using MU-MIMO and OFDMA to maintain throughput in crowded environments.
Thermals, Noise and Power Draw
Rated for continuous operation from -40 °F to 149 °F, the sealed IP-67 enclosure uses passive cooling so it runs silently in exposed locations. Maximum power draw is 63.7 W and the device is powered through PoE+ on either the 1 GbE or 2.5 GbE RJ-45 ports, with an external AC 120/230 V adapter available as an alternative.
Build, Connectors and Mounting
The ruggedised chassis is pole-mountable and weatherproof for permanent outdoor installation. Wired backhaul options include a 1 GbE/10 GbE SFP+ cage and a 2.5 GBase-T PoE+ port, while a second 1 GbE PoE+ output can daisy-chain and power a camera or another access point. Link aggregation and mesh networking features simplify large-scale deployments.
Highlights
- Wi-Fi 6 outdoor access point with IP-67 weatherproofing for reliable operation in harsh conditions
- Dual 4x4:4 radios deliver 1148 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz for high throughput
- Eight spatial streams with MU-MIMO and OFDMA support up to 1024 simultaneous client connections
- Flexible backhaul via SFP+ 1/10 GbE and 2.5 GBase-T PoE+ ports for resilient network design
- PoE+ output port powers attached devices such as IP cameras without extra cabling
Specifications
| Brand | Ruckus |
|---|---|
| Part Number | 901-T750-US51 |
| Standards | IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n, IEEE 802.11k, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11r, IEEE 802.11v, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi Certified 6 Compliant Standards: EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, RoHS, EN 60950-1, WEEE, EN 60601-1-2, IP67, EN 62311, EN 50121-4, IEC 61373, EN 50121-1, ISTA 2A |
| Frequency Band | 2.4 GHz, 5 GHz Performance: Maximum data rate (2.4 GHz): 1148 Mbps ¦ Maximum data rate (5 GHz): 2400 Mbps |
| Interface | 1 x 1000Base-T (PoE+) - RJ-45 ¦ 1 x 1Gb Ethernet/10Gb Ethernet - SFP+ ¦ 1 x 2.5 GBase-T (PoE+) - RJ-45 |
| Power Supply | Power Over Ethernet (PoE) Supported: PoE+ Power Device: External power adapter Voltage Required: AC 120/230 V |
| Max Power Consumption | Power Consumption Operational: 63.7 Watt |
| Temperature | Min Operating Temperature: -40 °F Max Operating Temperature: 149 °F |
| Humidity | 0 - 95% (non-condensing) |
| Features | Load balancing, Mesh networking, Wireless Intrusion Detection System (WIDS), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), pole mountable, weatherproof, Link Aggregation Control Protocol (LACP), Low Density Parity Check (LDPC), Space Time Blocking Code (STBC), GRE tunneling, Wireless Intrusion Prevention System (WIPS), Captive Portal, 802.1x authentication, BeamFlex+ Smart Antenna Technology, beamforming technology, rate limit, Hotspot Access Point Capability, Airtime Fairness, 4x4 MU-MIMO technology, 4x4:4 streams, port-based VLAN, 4x4 |
| Shipping weight | 2.84 kg |
| Package size | 345 × 241 × 102 mm |
Questions about this item
How do I mount and power the T750 SE using the 2.5 GBase-T PoE+ port, and what step do installers often miss?
Secure the unit with the pole-mount brackets, connect a PoE+ injector or switch delivering up to 63.7 W to the 2.5 GBase-T RJ-45 port, and verify the link negotiates 2.5 Gbps — many forget to enable PoE+ on the switch port.
Which components will need attention or replacement after extended outdoor deployment?
The IP-67 sealed enclosure and industrial-grade radios are built for continuous operation from -40 °F to 149 °F; plan only on replacing the external PoE injector or SFP+ module if they fail.
What throughput ceiling appears first when the AP serves hundreds of clients simultaneously?
The 2.5 Gbps Ethernet uplink and 3.5 Gbps aggregate Wi-Fi 6 rate (1148 Mbps on 2.4 GHz plus 2400 Mbps on 5 GHz) become the bottleneck before the 1,024-client capacity is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



