We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink XLR audio cable coiled, Neutrik connectors visible

RODE Microphone

RODE Microphone XLR-6 Premium XLR Cable 6m Pink

SKU CH-FR3G-8PFSD

A premium 6m XLR cable with Canare cable and Neutrik connectors for clean, low-noise signal transfer

  • Clean signal transfer with Canare cable and Neutrik connectors
  • Low-noise performance for professional audio recording
  • Six-metre length gives flexible studio placement
  • Pink colour helps identify cables in busy setups
  • Compatible with any XLR-equipped RODE microphone

RODE XLR-6 Pink 6m Cable

The RODE XLR-6 is a premium six-metre balanced audio cable built for studio and live use. It uses professional-grade Canare cable stock and Neutrik connectors to deliver clean signal transfer with extremely low noise. The pink finish helps identify runs in busy racks or on dark stages. It suits any device with a standard three-pin XLR connection.

Upgrading from basic XLR leads

Replacing thin or unshielded cables with the XLR-6 removes hum and handling noise that cheaper leads pick up. The jump is worth it when you hear interference on quiet sources or need reliable locking connectors for frequent patching. It will not fix noise that comes from ground loops, faulty preamps or unbalanced wiring elsewhere in the chain.

Plug-and-play installation

Connect the Neutrik plugs to matching XLR jacks; the latch locks automatically and releases with a press. No soldering, drivers or configuration are required. The most common issue is forcing a connector upside-down, which can bend pins on the receiving socket. Always align the keyway before pushing and avoid sharp bends near the strain relief.

Highlights

  • Clean signal transfer with Canare cable and Neutrik connectors
  • Low-noise performance for professional audio recording
  • Six-metre length gives flexible studio placement
  • Pink colour helps identify cables in busy setups
  • Compatible with any XLR-equipped RODE microphone

Specifications

No published specifications for this item yet.

Questions about this item

What connectors does the 6 m XLR-6 cable use?

It uses high-quality Neutrik XLR connectors on both ends for a secure, low-noise connection.

How do I plug the XLR-6 into my microphone and interface?

Align the keyway on each Neutrik plug with the socket, push straight in until the latch clicks, and avoid twisting the cable during insertion.

When should I replace the XLR-6 cable?

Replace it if the Neutrik latch no longer locks, the Canare jacket shows cuts or kinks, or you hear intermittent crackle when the cable is moved.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.