We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with red FXO module and gold PCI edge connector

Roby Technology Co., Limited

Roby Technology Co., Limited X100P FXO Card 1 Port PCI Low Profile telephone accessory

SKU CH-136K-JXCA7

PCI card with one FXO port connects a PSTN line to Asterisk-based PBX software

  • TypeAsterisk Card For IP PBX Appliance
  • FeaturesSupports Asterisk , Issabel, FreePbx ,VitalPBX,Free PBX,Free
  • Connect analogue lines to IP PBX with one FXO port
  • Low-profile PCI bracket fits 2U servers and compact chassis
  • Works with Asterisk, FreePBX, Issabel and DAHDI 2.2.0
  • Build a cost-effective VoIP gateway using open-source software
  • Red FXO module identifies the PSTN connection at a glance

Asterisk FXO Card with Single PSTN Port

This PCI card adds one FXO port so a standard telephone line can connect to an Asterisk-based PBX. It fits low-profile 2U servers and ships with the red FXO module installed. The board works with Dahdi drivers and popular open-source telephony platforms.

Installers building a small office VoIP gateway

Suitable for technicians assembling a SOHO phone system on a spare PC running FreePBX, Issabel or similar software. Not for installations that require multiple PSTN trunks or analogue extensions because only one FXO module is present.

PCI Interface and Single FXO Channel

The card uses a conventional PCI slot and provides exactly one FXO channel for PSTN connectivity. Verify the host has a free PCI slot and that the telephony software supports Dahdi 2.2.0 before purchase.

Highlights

  • Connect analogue lines to IP PBX with one FXO port
  • Low-profile PCI bracket fits 2U servers and compact chassis
  • Works with Asterisk, FreePBX, Issabel and DAHDI 2.2.0
  • Build a cost-effective VoIP gateway using open-source software
  • Red FXO module identifies the PSTN connection at a glance

Specifications

BrandAsteriskStore
TypeAsterisk Card For IP PBX Appliance
FeaturesSupports Asterisk , Issabel, FreePbx ,VitalPBX,Free PBX,Freeswitch,AsteriskNow ,Dahdi ...

Questions about this item

What comes in the box with the X100P card and what must I supply separately?

The package includes the PCI card with one red FXO module installed. You must provide a compatible PC with a free PCI slot, a PSTN telephone line, and an Asterisk-based software distribution such as Issabel or FreePBX.

The card is listed with one FXO port; are there other port counts or module colours to choose from?

This model is supplied with a single red FXO module only. No alternative port counts or green FXS modules are included or offered for this SKU.

What does the DAHDI 2.2.0 version shown in the configuration example mean for my Asterisk PBX?

It indicates the driver version used in the sample setup; the card works with the DAHDI kernel drivers included in current Asterisk, FreePBX, Issabel and FreeSWITCH releases for FXO signalling and echo cancellation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.