We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue lever tube bender marked 0-180 degrees with 5/8 inch radius form

Ridgid

Ridgid 38033 Lever Tube Bender 1/4 in OD 5/8 in Radius

SKU CH-3TB4-MDQXF

Lever-action bender forms 1/4 in OD stainless, steel or titanium tubing to a 5/8 in radius with 0-180° angle markings and lock/unlock carriage

  • Bends tubing up to 180 degrees with 0-180 degree markings on the form
  • Lever mechanism bends 1/4 in OD tubing to a 5/8 in centerline radius
  • Works with stainless steel, steel, titanium and other hard tubing materials
  • Carriage shows 0, 45, L, R alignment plus 90-180 and 0-90 lock/unlock indicators
  • Blue finish identifies the Ridgid 38033 lever tube bender at a glance

Precision bending for hard tubing

The Ridgid 38033 lever tube bender handles 1/4 in outside diameter stainless steel, steel and titanium with a 5/8 in centerline bend radius. Angle markings from 0 to 180 degrees on the form and 0, 45, L, R alignment on the carriage give repeatable reference points for plumbing and hydraulic line work.

Lever mechanism with lock positions

The carriage handle carries 90-180, 0-90, lock and unlock markings that change how the bender grips and releases the tube during a bend. This lets the operator set the engagement range, make the bend and free the workpiece without repositioning the tool or guessing the release point.

Compact steel frame for bench or field use

The blue finished body is built to withstand the forces needed for hard tubing while staying small enough to carry in a service kit. Fixed 5/8 in radius and 1/4 in OD capacity mean the tool is dedicated to one tube size, so buyers needing multiple diameters or larger radii will need additional benders.

Highlights

  • Bends tubing up to 180 degrees with 0-180 degree markings on the form
  • Lever mechanism bends 1/4 in OD tubing to a 5/8 in centerline radius
  • Works with stainless steel, steel, titanium and other hard tubing materials
  • Carriage shows 0, 45, L, R alignment plus 90-180 and 0-90 lock/unlock indicators
  • Blue finish identifies the Ridgid 38033 lever tube bender at a glance

Specifications

BrandRIDGID

Questions about this item

Will the 1/4 in OD lever bender need replacement formers or carriage parts over time?

The bender uses a fixed 5/8 in radius form with 0-180 degree angle markings and a carriage marked 0, 45, L, R for alignment; no separate maintenance parts are referenced.

What limits how many 180-degree bends I can make in stainless steel tubing in one session?

The tool is rated for stainless steel, steel and titanium up to 180 degrees with a 5/8 in centreline radius; sustained use is constrained by operator effort on the lever mechanism.

Does the lever bender generate noticeable heat or noise during repeated 90-degree bends on hard tubing?

It is a manual lever bender with no motor, so it produces negligible heat and only the sound of the lever action when bending stainless steel, steel or titanium tubing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.