RICHELIEU
RICHELIEU BP8742320195 12 5/8 in (320 mm) Center-to-Center Brushed Nickel hardware
A 320 mm centre-to-centre brushed nickel cabinet pull with included mounting hardware for a modern angular look
- TypeCabinet & Drawer Hardware
- Angular design modernises cabinetry aesthetics
- 320 mm centre-to-centre suits standard layouts
- Brushed nickel finish resists fingerprints and wear
- Mounting hardware included for straightforward fitting
- New condition ensures pristine surface and threads
Angular Pull for Modern Cabinetry
This brushed nickel pull updates cabinetry with a clean angular profile. The 320 mm centre-to-centre spacing suits standard drawer and door drilling. Mounting hardware is included so installation requires only basic tools. It is sold as a single piece for flexible layout planning.
Thermals Noise and Power Draw
As a passive metal fitting the pull generates no heat and draws no power. Operation is completely silent because there are no moving parts or electronics. The solid construction adds negligible thermal mass to the surrounding cabinetry. No cooling or electrical provision is needed.
Mounting Hardware and Layout Flexibility
Supplied 8/32 screws eliminate a separate fastener purchase and speed up fitting. Buying pulls individually lets you match the exact quantity to the project without surplus stock. The angular geometry allows two pulls to be paired for a custom geometric accent. Buyers needing integrated lighting or electronic locking will not find those features here.
Highlights
- Angular design modernises cabinetry aesthetics
- 320 mm centre-to-centre suits standard layouts
- Brushed nickel finish resists fingerprints and wear
- Mounting hardware included for straightforward fitting
- New condition ensures pristine surface and threads
Specifications
| Brand | RICHELIEU |
|---|---|
| Type | Cabinet & Drawer Hardware |
Questions about this item
How do I install the Richelieu BP8742320195 pull and which step often causes misalignment?
Use the included 8/32 screws to mount the pull through the 320 mm center-to-center holes; the step people get wrong is drilling the second hole before confirming the first is perfectly level.
What maintenance or replacement will the brushed nickel finish need over time?
Clean with a soft cloth and mild soap; avoid abrasive pads or harsh chemicals that can wear the brushed nickel coating and expose the base metal underneath.
At what point does the 8/32 screw thread engagement become the limiting factor under repeated heavy pulling?
The 8/32 machine screws provide adequate holding power for normal cabinet use; the limit appears first if the mounting surface strips or the screw threads loosen from overtightening during installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
