RICHELIEU
RICHELIEU BP720544195 21-7/16 in. 544 mm Brushed Nickel Cabinet Pull
A 544 mm centre-to-centre brushed nickel cabinet pull with included 8/32 mounting screws for vertical installation
- TypeCabinet & Drawer Hardware
- Sleek vertical design modernises contemporary spaces
- Off-centre grip adds distinctive visual interest
- Brushed nickel finish resists fingerprints and wear
- 544 mm centre-to-centre fits standard cabinetry
- Included 8/32 screws enable quick installation
Cabinet Pull Centre-to-Centre 544 mm
This brushed-nickel cabinet pull measures 21-7/16 inches centre-to-centre, or 544 mm, and is designed for vertical mounting on doors and drawers. The clean lines and off-centre grip suit contemporary kitchen or bathroom schemes. Mounting hardware with 8/32 screws is included for straightforward installation.
Sustained Daily Use
The solid metal construction resists bending when the pull is subjected to repeated opening forces over time. Brushed nickel finish maintains its appearance through frequent hand contact without showing fingerprints as readily as polished surfaces. No moving parts mean there is nothing to wear out under normal household traffic.
Installation Limits
The fixed 544 mm hole spacing must match existing cabinetry or be drilled accurately during new construction. Supplied 8/32 screws suit standard panel thicknesses but will not reach through unusually thick doors or drawer fronts. California Proposition 65 warnings indicate the product contains chemicals known to cause cancer and reproductive harm.
Highlights
- Sleek vertical design modernises contemporary spaces
- Off-centre grip adds distinctive visual interest
- Brushed nickel finish resists fingerprints and wear
- 544 mm centre-to-centre fits standard cabinetry
- Included 8/32 screws enable quick installation
Specifications
| Brand | RICHELIEU |
|---|---|
| Type | Cabinet & Drawer Hardware |
Questions about this item
Does the brushed nickel finish on the BP720544195 pull show fingerprints after daily use?
The brushed nickel surface resists visible fingerprints better than polished finishes, keeping the 544 mm pull looking clean with regular handling.
What tools and drill bit size are needed to install the included 8/32 screws?
You will need a drill with a 3/16 in. bit for pilot holes and a Phillips screwdriver to fasten the supplied 8/32 mounting screws.
Will the 21-7/16 in. center-to-center spacing match the holes on my existing cabinet doors?
Measure the distance between your current hole centres; this pull requires exactly 544 mm (21-7/16 in.) spacing to fit without new drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
