Rfwel Infra
Rfwel Infra Directional Yagi Antenna Kit 12 dBi 50 ft for MiFi 6620
High-gain directional Yagi antenna kit with lightning protection and 50 ft low-loss cable for MiFi 6620
- TypeAntenna kit
- 12 dBi gain extends cellular range
- Directional Yagi focuses signal between 698 and 2700 MHz
- 50 ft low-loss 400-series cable keeps attenuation below 1.9 dB at 698 MHz
- Built-in lightning protector and jumper safeguard the MiFi 6620
- Complete kit includes pigtail and adapters for a single antenna port
Kit for MiFi 6620 LTE router
The directional Yagi antenna kit is built for the Novatel Wireless MiFi 6620 mobile hotspot. It targets users who need stronger cellular reception at a fixed location such as a remote office, vehicle or rural building. The package includes the antenna, 50 ft of 400-series low-loss coaxial cable, a lightning protector, jumper cable and a dedicated pigtail for the MiFi 6620 port.
Accessories complete the signal path
The supplied pigtail connects the MiFi 6620 directly to the low-loss cable without extra adapters. A lightning protection device and a short jumper cable are included to safeguard equipment and join sections with minimal attenuation. All connectors are matched so the installer can assemble the link without hunting for additional parts. Ordering two kits allows both LTE antenna ports to be boosted simultaneously.
Limits of the 698–2700 MHz Yagi
The antenna covers 698 to 2700 MHz with 12 dBi gain, but it is directional and must be aimed at the target cell tower. Cable insertion loss is below 1.9 dB at 698 MHz and below 4 dB at 2700 MHz over the 50 ft run. Performance drops outside the stated band and the kit only addresses one antenna port unless a second kit is purchased.
Highlights
- 12 dBi gain extends cellular range
- Directional Yagi focuses signal between 698 and 2700 MHz
- 50 ft low-loss 400-series cable keeps attenuation below 1.9 dB at 698 MHz
- Built-in lightning protector and jumper safeguard the MiFi 6620
- Complete kit includes pigtail and adapters for a single antenna port
Specifications
| Type | Antenna kit |
|---|
Questions about this item
Will the pigtail connector for the MiFi 6620 need periodic replacement?
The kit includes a dedicated PIG6620 pigtail built for the MiFi 6620 port; it is a passive component with no moving parts and no specified replacement interval.
What limits signal quality first on a long cable run at the top of the band?
The 50 ft 400-series coaxial cable shows <4 dB insertion loss at 2700 MHz, so high-frequency attenuation is the first practical limit under sustained use.
Does the lightning protector or cable generate heat when the antenna runs continuously?
All components — Yagi antenna, lightning protector, jumper and coaxial cable — are passive RF parts; they do not consume power and produce no measurable heat during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Wilson Antennas 305-480 2 ft Silver Load FGT Fiberglass Whip Black antenna
Galtronics 02130269-04935U Indoor Omni Antenna 617-6000MHz 4.3-10 Female
- Antenna
Galtronics 02121269-04935U broadband ceiling mount omni antenna 698-6000MHz
- Antenna mount



