Rfwel Infra
Rfwel Infra 20 ft 12 dBi Directional Yagi Antenna Kit for Sprint MiFi 8000
Directional Yagi antenna kit with lightning protection and 20 ft low-loss cable boosts Sprint MiFi 8000 signal across 698–2700 MHz at 12 dBi gain
- TypeAntenna kit
- Boosts Sprint MiFi 8000 signal with 12 dBi directional Yagi gain
- Covers 698 to 2700 MHz for wide LTE band compatibility
- 20 ft 400-series coax keeps loss below .8 dB at 698 MHz
- Includes lightning protector and jumper for safe outdoor installs
- Pigtail adapter connects hotspot directly to low-loss cable
Directional Yagi Antenna Kit
The Rfwel Infra kit supplies a 12 dBi directional Yagi antenna tuned from 698 MHz to 2700 MHz plus 20 ft of 400-series low-loss coaxial cable, a lightning protector, a jumper cable and a dedicated pigtail for the Sprint MiFi 8000 Mobile Hotspot. It is designed for users who need stronger LTE reception at a fixed outdoor location. Buyers who want an omnidirectional pattern or indoor-only mounting will not be served by this directional design.
Signal Loss and Protection
The coaxial cable exhibits insertion loss below 0.8 dB at 698 MHz and below 1.7 dB at 2700 MHz, keeping attenuation low across the supported band. A lightning protection device and low-loss jumpers with matched connectors complete the chain so that normal outdoor exposure does not degrade the link.
Sustained Outdoor Operation
Because the antenna is directional, sustained performance depends on accurate aiming at the target cell tower and secure mounting that resists wind movement. The included lightning protector and weather-rated cable are built for continuous outdoor exposure rather than temporary or portable use. Ordering two kits is required to boost both LTE antenna ports on the hotspot.
Highlights
- Boosts Sprint MiFi 8000 signal with 12 dBi directional Yagi gain
- Covers 698 to 2700 MHz for wide LTE band compatibility
- 20 ft 400-series coax keeps loss below .8 dB at 698 MHz
- Includes lightning protector and jumper for safe outdoor installs
- Pigtail adapter connects hotspot directly to low-loss cable
Specifications
| Type | Antenna kit |
|---|
Questions about this item
How is the directional Yagi antenna installed and what step is often missed?
Mount the antenna outdoors, run the 20 ft 400-series coaxial cable to the lightning protector, connect the jumper cable, then attach the pigtail to the MiFi 8000 port; the step often missed is securing the lightning protector with a proper ground connection.
What maintenance or replacement will the kit need later?
Inspect the coaxial cable and connectors periodically for weather damage; replace the cable if insertion loss rises above 0.8 dB at 698 MHz or 1.7 dB at 2700 MHz, and replace the lightning protector after any strike.
What limit appears first under sustained use?
The 12 dBi directional Yagi covers 698–2700 MHz with insertion loss below 0.8 dB at 698 MHz and 1.7 dB at 2700 MHz; sustained high-power transmission or extreme weather will degrade cable loss performance first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Wilson Antennas 305-480 2 ft Silver Load FGT Fiberglass Whip Black antenna
Galtronics 02130269-04935U Indoor Omni Antenna 617-6000MHz 4.3-10 Female
- Antenna
Galtronics 02121269-04935U broadband ceiling mount omni antenna 698-6000MHz
- Antenna mount



