We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with four M.2 slots and a PCIe x8 edge connector

Revitol

Revitol LRNV9547LP-4I PCIe 3.0 x8 to Quad M.2 NVMe Adapter Card with Low Profile Bracket

SKU CH-3ZKV-K6EKQ

Adds four M.2 NVMe SSDs via a PCIe 3.0 x8 switch with a PLX 8747 chipset and includes a low-profile bracket

  • TypeCable Extender
  • Adds four NVMe drives through a single PCIe 3.0 x8 slot
  • PLX 8747 switch enables non-blocking full-speed operation on every port
  • Works without CPU or chipset PCIe bifurcation support
  • Low-profile and full-height brackets both included in the box
  • Compatible with Windows 10, Server 2016 and Linux kernel 3.3 or later

PCIe 3.0 x8 to Quad M.2 NVMe Adapter

The Revitol LRNV9547LP-4I is a PCIe 3.0 x8 switch card that connects four M.2 NVMe solid-state drives to a single expansion slot. It uses a PLX 8747 chipset to provide non-blocking, full line-rate bandwidth to every drive without requiring CPU or chipset bifurcation support. The card includes both full-height and low-profile brackets for flexible chassis fitment. It is designed for servers, workstations and high-capacity storage platforms.

Upgrade from single-drive

This adapter replaces configurations that rely on motherboard M.2 slots or PCIe bifurcation to run multiple NVMe drives. The jump is worthwhile when the platform lacks enough native lanes or bifurcation options, or when a single x8 slot must serve four drives at full Gen 3.0 speed. It also removes the dependency on specific CPU or chipset features for multi-drive operation.

Suits builders adding high-density NVMe storage

This card suits integrators who need four independent NVMe drives on a PCIe 3.0 x8 link with guaranteed non-blocking performance. It is not for systems that only offer PCIe 2.0 or x4 electrical connections, nor for users who need RAID functions handled by the adapter itself. Buyers requiring more than four drives or PCIe 4.0 and 5.0 speeds should look at alternative solutions.

Highlights

  • Adds four NVMe drives through a single PCIe 3.0 x8 slot
  • PLX 8747 switch enables non-blocking full-speed operation on every port
  • Works without CPU or chipset PCIe bifurcation support
  • Low-profile and full-height brackets both included in the box
  • Compatible with Windows 10, Server 2016 and Linux kernel 3.3 or later

Specifications

TypeCable Extender

Questions about this item

Does the LRNV9547LP-4I need a PCIe 3.0 x8 slot and a low-profile bracket to fit?

Yes, the card uses a PCIe 3.0 x8 host bus and includes a low-profile bracket for slim chassis.

What is the common mistake when installing the PLX 8747 switch card with four M.2 drives?

Forgetting to seat each NVMe SSD fully into the M.2 slot before securing the retention screw.

Which M.2 lengths will need replacement if I later upgrade to 22110 drives?

The adapter supports 2242, 2260 and 2280 mm lengths only; 22110 drives will not fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.