Renfroe
Renfroe SCPA-00.50-A Plate Clamp 1000 lb Vertical Lift 0 to 3/4 in
Lifts steel plates up to 3/4 in thick with a 1,000 lb vertical capacity and 180-degree flip operation
- TypeWheelbarrows & Carts
- 1,000 lb vertical lift capacity for heavy steel plates
- 0 to 3/4 in jaw range handles thin to thick material
- 180-degree flip operation enables versatile positioning
- Teeth grip secures load during overhead moves
- ASME BTH-1 compliance confirms structural design standard
Renfroe SCPA-00.50-A Plate Clamp
The Renfroe SCPA-00.50-A is a vertical-lift plate clamp rated for a 1000 lb working load limit. It handles steel plates from zero up to three-quarters of an inch thick. The clamp uses a manual open and close mechanism with toothed jaws for a secure grip. It is built for rigging and material-handling tasks in yards and workshops.
1000 lb Working Load Limit
The single specification that decides fit is the 1000 lb working load limit. Every lift must stay at or below this figure. The jaw range of zero to three-quarters of an inch sets the material thickness window. ASME BTH-1 compliance confirms the design standard for below-the-hook devices.
Vertical Lift with 180 Degree Flip
The clamp attaches via a load ring with chain that fits a 1 3/4 in diameter hook or shackle. Operation is vertical lift with a 180 degree flip capability for turning plates. Overall dimensions are 12 1/4 in height, 2 3/8 in width and 6 5/8 in depth. Steel construction withstands repeated site use. Not for loads exceeding 1000 lb or plates thicker than three-quarters of an inch.
Highlights
- 1,000 lb vertical lift capacity for heavy steel plates
- 0 to 3/4 in jaw range handles thin to thick material
- 180-degree flip operation enables versatile positioning
- Teeth grip secures load during overhead moves
- ASME BTH-1 compliance confirms structural design standard
Specifications
| Brand | RENFROE |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What does the 1000 lb working load limit mean when the clamp is on a real job?
It is the maximum weight the clamp is rated to lift vertically; the 180 degree flip capability lets you turn the load once it is clear of the ground.
How does the ASME BTH-1 standard affect what this clamp can do?
The standard covers design and testing for below-the-hook lifting devices, so the clamp meets recognised safety requirements for vertical plate handling.
Will the 12 1/4 in overall height and 2 3/8 in width fit my crane hook and plate stack?
The clamp stands 12 1/4 in tall, 2 3/8 in wide and 6 5/8 in deep with a 1 3/4 in attachment diameter, so check your hook throat and stack clearance against those dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
