We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light yellow hydraulic fluid in a 5 gallon pail

Renewable Lubricants

Renewable Lubricants Tractor Hydraulic Fluid 5W-20 5 Gal 81304

SKU CH-WK8P-NTTSY

Vegetable-oil hydraulic fluid rated ISO 32 and SAE 5W-20 meets ASTM D-5864, ISO 15380 and VGP standards, operates from -40 °F to 250 °F with a viscosity index of 213, and comes in a 5-gal pail

  • Bio-based formula meets EAL and VGP standards for environmentally sensitive areas
  • Wide -40 °F to 250 °F operating range suits year-round tractor use
  • High 213 viscosity index keeps film strength stable across temperature swings
  • 385 °F flash point adds safety margin in high-heat hydraulic systems
  • Meets ASTM D5864 and ISO 15380 for proven biodegradable performance

Renewable Lubricants Tractor Hydraulic Fluid 5W-20

This hydraulic fluid uses a vegetable oil base and carries an ISO Viscosity Grade 32 with SAE 5W-20 rating. It meets ASTM D-5864, EAL, ISO 15380 and VGP standards for environmentally acceptable lubricants. The product comes in a 5 gal pail and is identified by part number 81304.

Capacity and temperature headroom

The fluid operates from -40 Degrees F to 250 Degrees F with a viscosity index of 213 and a pour point of -49 Degrees F. A flash point of 385 Degrees F provides a wide safety margin under high heat. The 5 gal container supplies enough volume for a complete system fill on many tractors.

Replaces conventional mineral hydraulic oils

Switching to this biobased fluid upgrades environmental compliance where EAL or VGP rules apply. The jump is worth it when regulations require readily biodegradable lubricants or when cold starts below -40 Degrees F demand the low pour point. It is not suited for systems that specify a different viscosity grade or require a Timken OK load rating.

Highlights

  • Bio-based formula meets EAL and VGP standards for environmentally sensitive areas
  • Wide -40 °F to 250 °F operating range suits year-round tractor use
  • High 213 viscosity index keeps film strength stable across temperature swings
  • 385 °F flash point adds safety margin in high-heat hydraulic systems
  • Meets ASTM D5864 and ISO 15380 for proven biodegradable performance

Specifications

BrandRenewable Lubricants

Questions about this item

Will this 5W-20 fluid work in my older tractor that previously used a straight 30-weight hydraulic oil?

The fluid meets ISO VG 32 and SAE 5W-20 grades with a viscosity index of 213, so it flows at -40 °F yet protects at 250 °F, covering a wider range than single-grade oils.

How can I verify the fluid is performing correctly after the first few hours of operation?

Check that system pressure holds steady, listen for pump cavitation, and confirm operating temperature stays within the -40 °F to 250 °F window; the high 213 viscosity index helps maintain consistent flow.

The 5-gallon pail arrives sealed — do I need any extra fittings or additives before pouring it into the reservoir?

The pail contains only the vegetable-base hydraulic fluid meeting ASTM D-5864, EAL, ISO 15380 and VGP standards; no additives are required, but you will need your own funnel or pump to transfer the liquid.

More in Hydraulic System Components

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.