Renewable Lubricants
Renewable Lubricants 87003 Penetrating Lubricant 1 gal Vegetable Oil Jug
Vegetable-oil penetrating lubricant in a 1-gal jug, H1 NSF rated, 0 % VOC, works from 0 °F to 280 °F
- H1 NSF rating allows incidental food contact
- 0 % VOC content meets 50-state compliance
- Penetrates rusted parts down to 0 °F
- Vegetable-oil base operates up to 280 °F
- High 294.8 °F flash point reduces fire risk
Renewable Lubricants 87003 Penetrating Lubricant
This vegetable-oil based penetrating lubricant comes in a one-gallon jug. It is designed to free corroded or seized fasteners in automotive, industrial and maintenance settings. The fluid carries an H1 NSF rating for incidental food contact.
Suited for shops needing a low-VOC penetrant
Technicians who require a product with zero percent VOC content and 50-state compliance will find this formula meets those regulations. It operates between 0 and 280 degrees Fahrenheit. Buyers needing a non-flammable penetrant or a smaller container should look at something else.
Performs under sustained high-temperature exposure
With a flash point of 294.8 degrees Fahrenheit, the lubricant remains stable during prolonged use near its maximum operating temperature of 280 degrees Fahrenheit. The vegetable oil base resists evaporation during extended soak times. Its odorless formulation maintains consistent viscosity without breaking down under continuous thermal cycling.
Highlights
- H1 NSF rating allows incidental food contact
- 0 % VOC content meets 50-state compliance
- Penetrates rusted parts down to 0 °F
- Vegetable-oil base operates up to 280 °F
- High 294.8 °F flash point reduces fire risk
Specifications
| Brand | RENEWABLE LUBRICANTS |
|---|
Questions about this item
Does the 87003 penetrating lubricant require any special tools to apply from the 1 gal jug?
The jug pours directly; a spray bottle or brush can be used for targeted application but no proprietary tool is needed.
Can I use this vegetable-oil lubricant on older fasteners that have existing petroleum-based residue?
Yes, it penetrates through old residue and is compatible with metal surfaces previously treated with petroleum products.
How can I verify the 87003 lubricant is performing correctly after applying it to a seized bolt?
The bolt should turn with noticeably less torque, and the fluid’s odorless, yellow film will remain visible at temperatures up to 280 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
