We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light yellow hydraulic fluid in a 5 gal pail

Renewable Lubricants

Renewable Lubricants 81634 5 gal Bio-Bottle Jack Hydraulic Fluid Pail 32 ISO accessory

SKU CH-5FTR-91K32

Vegetable-based ISO 32 hydraulic fluid operates from -20 °F to 250 °F with a 550 °F flash point

  • ISO 32 viscosity ensures smooth jack operation
  • vegetable-oil base fluid is biodegradable and non-toxic
  • viscosity index 186 maintains performance across temperatures
  • operates from -20 °F to 250 °F in extreme conditions
  • flash point 550 °F adds safety during high-heat use

Hydraulic Fluid ISO 32

Renewable Lubricants 81634 supplies a vegetable-oil based hydraulic fluid rated ISO VG 32 for bottle-jack and general hydraulic systems. The five-gallon pail delivers 5 gal of fluid suited to equipment specifying this viscosity grade.

Cold-Start and Heat Stability

The fluid pours at -31 degrees F and remains pumpable down to -20 degrees F, so jacks actuate reliably in sub-zero conditions. At the upper end it withstands 250 degrees F continuous operating temperature without breaking down. A viscosity index of 186 means thickness changes very little across that span.

Flash Point and Application Limits

A 550 degrees F flash point gives a wide safety margin around hot surfaces or frictional heating. The product carries no NSF rating, so it is not approved for food-processing or potable-water contact. Buyers needing a certified food-grade fluid must select a different formulation.

Highlights

  • ISO 32 viscosity ensures smooth jack operation
  • vegetable-oil base fluid is biodegradable and non-toxic
  • viscosity index 186 maintains performance across temperatures
  • operates from -20 °F to 250 °F in extreme conditions
  • flash point 550 °F adds safety during high-heat use

Specifications

BrandRENEWABLE LUBRICANTS

Questions about this item

Does the 550 Degrees F flash point mean the fluid handles continuous all-day heat without breaking down?

The fluid is rated for a maximum operating temperature of 250 Degrees F and a flash point of 550 Degrees F, so it remains stable during extended high-temperature use.

My bottle jack takes ISO 32 fluid — will this pail work straight out of the container?

Yes, this is ISO Viscosity Grade 32 hydraulic oil in a 5 gal pail, ready to pour into any jack or system specifying ISO 32.

Can I mix this vegetable-oil-based fluid with the mineral oil already in my older floor jack?

Mixing vegetable-oil-based fluid with mineral oil is not recommended; drain the old fluid completely before filling with this ISO 32 product.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.