Renewable Lubricants
Renewable Lubricants 81004 Hydraulic Oil 32 ISO 5 gal Pail
Biodegradable ISO 32 hydraulic oil in a 5 gal pail operates from -30 to 250 degrees F with a 184 viscosity index
- Biodegradable base reduces environmental impact
- ISO 32 viscosity suits hydraulic vanes and pumps
- Wide -30 °F to 250 °F operating range
- High 184 viscosity index maintains film strength
- 457 °F flash point enhances fire safety
Hydraulic Oil 32 ISO 5 gal Pail
Renewable Lubricants 81004 is a biodegradable hydraulic fluid supplied in a five-gallon pail for industrial and mobile hydraulic systems. Its ISO 32 viscosity grade and viscosity index of 184 suit equipment requiring consistent flow across a wide temperature range. The fluid is formulated for hydraulic vanes, pumps, mobile service equipment and jacks operating in demanding environments.
Biodegradable base and temperature stability
The biodegradable base reduces environmental impact while maintaining lubrication performance. A pour point of -40 degrees C and flash point of 457 degrees F extend the usable range from -30 to 250 degrees F. Viscosity at 40 degrees C is 155 cSt, supporting reliable operation in cold starts and sustained high-temperature duty.
Suits hydraulic vanes pumps and mobile jacks
This oil fits operators of hydraulic vanes, pumps, mobile service hydraulic equipment and jacks needing an ISO 32 fluid with a high viscosity index. Buyers requiring a different ISO grade, a non-biodegradable formulation or a container size other than five gallons should look at alternative products.
Highlights
- Biodegradable base reduces environmental impact
- ISO 32 viscosity suits hydraulic vanes and pumps
- Wide -30 °F to 250 °F operating range
- High 184 viscosity index maintains film strength
- 457 °F flash point enhances fire safety
Specifications
| Brand | Renewable Lubricants |
|---|
Questions about this item
How often should the ISO 32 hydraulic oil be changed in vane pumps running at 250 °F?
With a viscosity index of 184 and a flash point of 457 °F, the fluid resists thinning and oxidation at the upper end of its -30 to 250 °F range, extending drain intervals in vane pumps and mobile hydraulic equipment.
At what temperature does the oil’s viscosity drop below the level needed to protect pump components?
The oil maintains 155 cSt at 40 °C and a high 184 viscosity index, so viscosity stays within the ISO 32 grade well up to the rated 250 °F limit, protecting vanes and pumps under sustained heat.
Will the fluid overheat or create fumes during continuous all-day operation in a hydraulic press?
A 457 °F flash point and a pour point of -40 °C give a wide thermal window; the oil runs cool and vapour-free through the full -30 to 250 °F operating range during extended shifts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
