Reliance
Reliance PC3020 Generator Power Cord 20 ft L14-30P L14-30R 10 AWG 30 A
A 20 ft transfer-switch cord with L14-30P plug and L14-30R connector, 10 AWG rubber jacket, rated 30 A at 125/250 V AC to UL 1008
- 20 ft length reaches distant generator hookups
- L14-30P and L14-30R connectors lock securely
- 10 AWG copper handles 30 A continuous load
- 125/250 V rating matches transfer-switch requirements
- UL 1008 listed for code-compliant installations
Reliance PC3020 20 ft Generator Cord
The Reliance PC3020 is a 20-foot generator power cord built with 10 AWG conductors and a rubber jacket. It carries a 30 A, 125/250 V AC rating and terminates in NEMA L14-30P plug and L14-30R connector ends. The cord meets UL 1008 standards for transfer switch applications.
Suits transfer-switch installations needing a 30
This cord fits installations that use a 30 A inlet box or transfer switch with L14-30 connections. It is not for setups requiring a different amperage rating, a different NEMA configuration, or a longer run than 20 feet.
30 A, 125/250 V rating with L14-30 ends
The single specification that decides fit is the 30 A, 125/250 V AC rating combined with NEMA L14-30P plug and L14-30R connector. Verify that the generator inlet and transfer switch match this exact rating and connector type before purchase.
Highlights
- 20 ft length reaches distant generator hookups
- L14-30P and L14-30R connectors lock securely
- 10 AWG copper handles 30 A continuous load
- 125/250 V rating matches transfer-switch requirements
- UL 1008 listed for code-compliant installations
Specifications
| Brand | RELIANCE CONTROLS |
|---|
Questions about this item
Will the 10 AWG conductors need replacement after years of outdoor use?
The rubber jacket resists weathering, but inspect the cord annually for cracks or abrasion; replace it if the insulation shows any damage.
What limits continuous 30 A loads on the L14-30P/L14-30R connectors?
The 10 AWG wire is rated for 30 A; sustained loads at that level are the design limit, so do not exceed the 30 A rating.
Does the rubber jacket stay cool and quiet when the cord carries 30 A all day?
The cord produces no noise; expect moderate warmth along the 20 ft length at full 30 A load, which is normal for 10 AWG conductors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
