We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber rectangular mini light bar, 15 inches long, 2.5 inches high, LED flashing, IP69K rated

Reflex

Reflex ECCO 5587A Mini Light Bar Amber

SKU CH-9W49-6PMHH

Amber LED mini light bar with SAE J845 Class 1 flashing pattern, IP69K rating, and 12-24V DC operation for universal vehicle mounting

  • ColorAmber
  • SAE J845 Class 1 rating meets strict emergency-vehicle visibility standards
  • IP69K sealing withstands high-pressure wash-down and dust ingress
  • 12-24 V DC input works on both 12 V and 24 V electrical systems
  • Eight LED heads produce a 60 W flashing amber signal
  • Permanent mount with blunt-cut wires simplifies fixed installation

Amber LED mini light bar for universal vehicle fit

The Reflex ECCO 5587A is a compact rectangular light bar measuring 15 inches long. It uses eight LED heads to produce a flashing amber pattern suitable for hazard or warning applications on any compatible vehicle.

Permanent mount with blunt-cut wires and IP69K

Installation is permanent and the unit connects via blunt-cut wires for direct integration into a 12-24V DC electrical system. The housing carries an IP69K rating, meaning it withstands high-pressure and high-temperature wash-downs without water ingress.

SAE J845 Class 1 output at 60 watts with low noise

The light bar meets SAE J845 Class 1 photometric requirements while drawing 60 watts. LED technology runs cool and silent in normal operation, so there is no fan noise and minimal thermal load on the vehicle electrical system.

Highlights

  • SAE J845 Class 1 rating meets strict emergency-vehicle visibility standards
  • IP69K sealing withstands high-pressure wash-down and dust ingress
  • 12-24 V DC input works on both 12 V and 24 V electrical systems
  • Eight LED heads produce a 60 W flashing amber signal
  • Permanent mount with blunt-cut wires simplifies fixed installation

Specifications

BrandECCO
ColorAmber

Questions about this item

What SAE class does the ECCO 5587A meet and what does that cap in practice?

It meets SAE J845 Class 1, the highest warning-light class, so its flash pattern and amber output are rated for primary emergency and utility use.

What mounting footprint does the 15 in by 9 in by 2 1/2 in bar need?

The rectangular housing measures 15 in long, 9 in deep and 2 1/2 in high, so it fits a flat roof or bracket with at least that clear footprint.

How is the blunt-cut wire harness connected and what step is often missed?

Strip the blunt-cut leads, crimp or solder to a 12-24V DC supply with an in-line fuse, then seal every joint — skipping the fuse is the common error.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.