Reelcraft
Reelcraft S601031-4 replacement twin welding hose 1/4 in 4 ft Grade T 200 psi
A 4 ft twin welding hose assembly rated 200 psi at 70 °F for MAPP, propane, natural gas and fuel gas
- TypeWelding Supplies
- Grade T rated for MAPP, propane and natural gas
- 200 psi working pressure at 70 °F for fuel-gas safety
- Twin green and red lines simplify gas identification
- Brass 9/16 in FRH and FLH fittings connect directly
- 4 ft length fits compact reel setups
Replacement twin hose for fuel gas
The REELCRAFT S601031-4 is a 4 ft Grade T replacement twin welding hose assembly designed for MAPP, propane, natural gas, and other fuel gas applications. It features a 1/4 in inside diameter with colour-coded green and red lines for easy identification. Brass female 9/16 in FRH x 9/16 in FLH fittings are factory-coupled for immediate use. The hose meets CGA Type VD and RMA standards for welding supply connections.
Sustained pressure and temperature performance
The hose is rated for a maximum working pressure of 200 psi at 70 F, maintaining integrity during extended welding or cutting operations. Its synthetic rubber cover, rubber tube, and fiber reinforcement resist degradation up to a maximum operating temperature of 150 Degrees F. Grade T construction ensures compatibility with fuel gases without the cracking seen in lower-grade hoses under continuous heat. Pressure retention remains stable across the rated temperature range.
Simple push-on installation with standard fittings
Pre-assembled brass fittings thread directly onto compatible regulators and torches without additional tools or clamps. The 4 ft length suits bench-top setups but may restrict movement on larger workpieces. Users must verify that 9/16 in FRH and FLH threads match their existing equipment before connecting. Incorrect thread engagement is the most common cause of leaks during initial pressurisation.
Highlights
- Grade T rated for MAPP, propane and natural gas
- 200 psi working pressure at 70 °F for fuel-gas safety
- Twin green and red lines simplify gas identification
- Brass 9/16 in FRH and FLH fittings connect directly
- 4 ft length fits compact reel setups
Specifications
| Brand | REELCRAFT |
|---|---|
| Type | Welding Supplies |
Questions about this item
Does the 200 psi rating hold steady when the hose runs all day at 70 F?
The hose is rated for 200 psi maximum working pressure at 70 F and a maximum operating temperature of 150 F, so it maintains that pressure during continuous use within those limits.
What fittings must my regulator and torch already have to connect this twin hose?
The assembly comes with brass female 9/16 in FRH x 9/16 in FLH ends, so your regulator and torch need matching 9/16 in FRH and FLH male connections.
Will this Grade T hose work safely with the older acetylene torch I still use?
Grade T is approved for MAPP, propane, natural gas and fuel gas; it is not rated for acetylene, so an older acetylene torch would require a different hose grade.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
