We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PVC air hose coiled with brass fittings on each end

Reelcraft

Reelcraft S601015-100 3/8 in 100 ft PVC Air Hose 300 psi Red

SKU CH-WD7J-DV8JP MPN S601015-100

A 100 ft PVC air hose rated to 300 psi at 70 °F with brass MNPT fittings

  • TypeDrain Components
  • ColorRed
  • 100 ft reach for large work areas
  • 300 psi rating handles demanding air tools
  • Brass MNPT fittings resist corrosion and leaks
  • PVC construction stays flexible from 0 to 150 °F
  • 4:1 safety factor meets ANSI B 1.20.1 standard

Reelcraft 3/8 in 100 ft PVC Air Hose

The Reelcraft S601015-100 is a coupled multipurpose air hose built with PVC tube and cover material. It measures 100 ft in length with a 3/8 in inside diameter and 5/8 in outside diameter. Brass MNPT fittings sized 3/8 in and 1/2 in come pre-attached for immediate connection.

Suits workshops needing 300 psi capacity at 70 F

This hose serves pneumatic tools and compressed-air lines requiring a 300 psi working pressure with a 4:1 safety factor. The temperature range spans 0 to 150 Degrees F. Buyers who need a higher pressure rating, a different fitting configuration, or a non-PVC tube material should consider other options.

300 psi working pressure at 70 F decides fit

The single specification that determines suitability is the maximum working pressure of 300 psi measured at 70 F. Verify that your compressor and tooling operate within this limit before purchasing. The hose meets ANSI B 1.20.1 standards for thread compatibility.

Highlights

  • 100 ft reach for large work areas
  • 300 psi rating handles demanding air tools
  • Brass MNPT fittings resist corrosion and leaks
  • PVC construction stays flexible from 0 to 150 °F
  • 4:1 safety factor meets ANSI B 1.20.1 standard

Specifications

TypeDrain Components
ColorRed
BrandReelcraft
ModelS601015-100 1

Questions about this item

What size thread does the 3/8 in end of the S601015-100 hose use?

The 3/8 in end uses a 3/8 in MNPT brass fitting that threads directly into a matching female NPT port.

Which step do installers most often miss when connecting the 1/2 in end?

They forget to wrap the 1/2 in MNPT brass threads with PTFE tape before tightening, which can cause leaks at 300 psi.

When should the coupled assembly be replaced based on the 4:1 safety factor?

Replace the hose if the cover shows cracks, the tube hardens outside the 0 to 150 °F range, or fittings corrode.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.