We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PVC air hose 25 ft coiled with brass MNPT fittings

Reelcraft

Reelcraft S601012-25 3/8" x 25 ft PVC Air Hose 300 psi Red

SKU CH-8XP4-AP9GK MPN S601012-25

A 25 ft red PVC air hose rated to 300 psi at 70 °F with brass MNPT fittings

  • TypeDrain Components
  • 3/8" bore delivers ample airflow for pneumatic tools
  • 25 ft length gives generous reach around the workshop
  • 300 psi rating at 70 °F handles demanding air supply tasks
  • Brass MNPT fittings on both ends ensure leak-free connections
  • PVC tube and cover withstand 0 °F to 150 °F operating range

3/8" PVC air hose for compressed-air tools

This 25 ft coupled assembly uses a red PVC tube and cover rated for 300 psi at 70 F with a 4:1 safety factor. Brass MNPT fittings in 1/4 in and 3/8 in sizes connect directly to common compressor outlets and tool inlets. The hose meets ANSI B 1.20.1 threading standards and operates from 0 to 150 degrees F.

Check fitting thread size

Verify that your compressor and tools accept 1/4 in and 3/8 in MNPT connections so the supplied brass couplers seal without adapters. Confirm the system working pressure does not exceed 300 psi at 70 F and that ambient temperatures stay within the 0 to 150 degrees F range. Ensure the 3/8 in inside diameter delivers sufficient flow for the intended pneumatic equipment.

Sustained pressure holding with PVC construction

The PVC tube and cover maintain the rated 300 psi working pressure continuously at 70 F thanks to the 4:1 safety factor. Brass MNPT fittings resist leakage during extended use cycles without the loosening sometimes seen on quick-connect couplers. Material properties remain stable across the full 0 to 150 degrees F temperature span during long shifts.

Highlights

  • 3/8" bore delivers ample airflow for pneumatic tools
  • 25 ft length gives generous reach around the workshop
  • 300 psi rating at 70 °F handles demanding air supply tasks
  • Brass MNPT fittings on both ends ensure leak-free connections
  • PVC tube and cover withstand 0 °F to 150 °F operating range

Specifications

TypeDrain Components
BrandReelcraft
ModelS601012-25 1

Questions about this item

Does the S601012-25 come with fittings already attached or do I need to buy couplers separately?

The hose is a coupled assembly with brass MNPT fittings on both ends — one 1/4 in and one 3/8 in — so no extra couplers are required.

Should I choose the 3/8 in bore or a different diameter for a typical shop compressor?

The 3/8 in inside diameter suits most general-purpose air tools and matches the 300 psi rating at 70 F.

What does the 300 psi rating mean when the hose is on a reel in daily use?

It is the maximum working pressure at 70 F with a 4:1 safety factor; the hose handles 0 to 150 F per ANSI B1.20.1.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.