REED INSTRUMENTS
REED INSTRUMENTS R1430 Conductivity Standard 1413uS laboratory supply
Conductivity standard solution at 1413 µS for calibrating conductivity probes
- Precise calibration with 1413 µS standard solution
- Reliable readings from REED INSTRUMENTS quality
- Ready-to-use fluid for conductivity probes
- Consistent results for laboratory measurements
- New condition ensures uncontaminated reference solution
Calibration Standard 1413 µS
The REED INSTRUMENTS R1430 is a conductivity standard solution calibrated to 1413 µS for laboratory probe calibration. It provides a known reference value so technicians can verify and adjust meter accuracy before testing samples. The fluid is supplied new and ready for immediate use in quality-control workflows.
Single-Point Verification Limit
A single standard only confirms accuracy at 1413 µS and does not prove linearity across the full measuring range. Probes used in low or high conductivity samples need additional standards to validate performance at those extremes. Users must schedule regular recalibration because solution value drifts with age and contamination.
Fixed 1413 µS Reference Value
The decisive specification is the fixed 1413 µS conductivity value; this bottle cannot serve applications that require a different calibration point. Buyers who need multi-point calibration curves or standards for other conductivity ranges must source additional solutions separately.
Highlights
- Precise calibration with 1413 µS standard solution
- Reliable readings from REED INSTRUMENTS quality
- Ready-to-use fluid for conductivity probes
- Consistent results for laboratory measurements
- New condition ensures uncontaminated reference solution
Specifications
| Brand | REED INSTRUMENTS |
|---|
Questions about this item
Which REED INSTRUMENTS conductivity standard should I choose for my probe?
The R1430 provides a 1413 µS/cm reference value that matches the calibration point required by most conductivity meters.
What does the 1413 µS/cm figure mean when I use this solution?
It gives a known conductivity reference so your probe can be adjusted to read accurately at that level.
Does the solution follow a recognised standard for calibration work?
It is manufactured as a conductivity standard solution for probe calibration in laboratory use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
