Red Hat
Red Hat SC8551A001MS 120V AC Aluminum Pilot Solenoid Valve 1/4 in 150 psi
A 120V AC aluminium pilot solenoid valve with a 1/4 in orifice and 0.86 Cv, rated to 150 psi for air and inert gases
- TypeDrain Components
- Configurable 3-way operation adapts to system needs
- 120V AC coil provides standard voltage control
- 150 psi air/inert gas rating handles demanding pressure
- Anodized aluminum body resists corrosion in harsh environments
- 86 Cv flow coefficient delivers efficient media passage
1/4 in 3-Way Pilot Solenoid Valve
This Red Hat SC8551A001MS valve is a 3-way remote pilot solenoid designed for air and inert gas systems. It suits technicians and engineers who need reliable on-off control in 1/4 in piping with a 120V AC coil.
Sustained operation at 150 psi differential
The valve maintains its rated 0.86 Cv flow coefficient while operating continuously at up to 150 psi air or inert gas differential. NBR seals and an anodized aluminium body resist wear and corrosion during extended duty cycles without pressure spikes.
Direct pipe mounting with configurable start
The 1/4 in NPT ports allow direct in-line installation without brackets. The configurable starting position lets installers set normally open or normally closed function before pressurising. A common error is wiring the 120V AC coil to DC voltage, which prevents pilot operation.
Highlights
- Configurable 3-way operation adapts to system needs
- 120V AC coil provides standard voltage control
- 150 psi air/inert gas rating handles demanding pressure
- Anodized aluminum body resists corrosion in harsh environments
- 86 Cv flow coefficient delivers efficient media passage
Specifications
| Type | Drain Components |
|---|---|
| Brand | Red Hat |
| Model | SC8551A001MS |
Questions about this item
How much heat or noise does the 120V AC pilot solenoid valve produce when running continuously?
The valve operates on 120V AC with a Cv of .86 and a maximum pressure differential of 150 psi for air and inert gases; it has no fan or active cooling, so heat and noise are minimal during continuous duty.
What piping and media connections are required to install the 1/4 in NPT aluminum valve?
The valve has a 1/4 in nominal pipe size and 1/4 in orifice; it requires compatible 1/4 in NPT fittings and is rated for air or inert gases only, not fuel gas or fuel oil.
Will the NBR-sealed aluminum body work with older compressed-air systems that run at lower pressures?
Yes, the valve handles a maximum operating pressure differential of 150 psi for air and inert gases, and the NBR seals are compatible with typical legacy pneumatic lines operating within that range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



