We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with PTFE seals, 120V AC coil, 3/8 NPTF connections

Red Hat

Red Hat 8263H206LT 2-Way Solenoid Valve 3/8 in NPTF 120V AC 17.1W 7/32 in Orifice Brass PTFE Cryogenic

SKU CH-X2VX-GH1DP MPN 8263H206LT

Direct-acting, normally closed solenoid valve with brass body, PTFE seals, 7/32 in orifice, 120V AC coil, 17.1 W, NPTF connections, up to 100 psi cryogenic

  • TypeDrain Components
  • Direct-acting design ensures reliable flow control
  • Brass body with PTFE seals handles air, inert gases, light oil and water
  • 120V AC coil consumes 17.1 watts for efficient operation
  • Watertight coil enclosure with 18-inch leads simplifies installation
  • Operates from -13°F ambient up to 150°F fluid temperature

Direct-acting cryogenic valve

The Red Hat 8263H206LT is a normally closed 2-way solenoid valve built for controlling air, inert gases, light oil and water. Its brass body and PTFE seals handle fluid temperatures up to 150°F and ambient conditions from -13°F to 131°F. The valve mounts horizontally or vertically on 3/8 in NPTF threads. It suits process lines needing reliable on-off control in low-temperature service.

Watertight coil with 18 in leads

A 120V AC 60 Hz coil consuming 17.1 W is included and housed in a watertight enclosure without a junction box. The 1/2 in conduit connection and 18 in leads simplify wiring in panels or junction boxes. No separate coil purchase is required. The direct-acting design operates from zero pressure differential up to the rated limits.

Pressure and temperature boundaries

Maximum operating pressure differential is 90 psi for air and inert gases and 100 psi for cryogenic fluids. The 7/32 in orifice sets the flow capacity for the intended media. Ambient temperatures below -13°F or above 131°F fall outside the validated range. Fluid temperatures above 150°F are not supported by the PTFE seals.

Highlights

  • Direct-acting design ensures reliable flow control
  • Brass body with PTFE seals handles air, inert gases, light oil and water
  • 120V AC coil consumes 17.1 watts for efficient operation
  • Watertight coil enclosure with 18-inch leads simplifies installation
  • Operates from -13°F ambient up to 150°F fluid temperature

Specifications

TypeDrain Components
BrandRed Hat
Model8263H206LT

Questions about this item

How often will the PTFE seals and 7/32 in orifice need replacement?

PTFE seals resist the listed fluids and the -13°F to 131°F ambient range, so routine replacement is not scheduled; inspect the 7/32 in orifice only if flow drops below expected levels.

What pressure limit appears first during continuous operation?

The valve reaches its maximum operating pressure differential of 90 psi for air and inert gases or 100 psi for cryogenic fluids before any other limit is encountered.

How much heat does the 17.1 W coil produce when energised all day?

The coil draws 17.1 W at 120 V AC, 60 Hz; that power becomes heat inside the watertight enclosure, and the valve is rated for ambient temperatures up to 131°F and fluid temperatures up to 150°F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.