We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with compact cylindrical body and electrical coil enclosure

Red Hat

Red Hat 8262R202 Brass Solenoid Valve 1/4 in 100-240V AC/DC NC

SKU CH-CAPW-SKFM3 MPN 8262R202

A brass solenoid valve controls fluid flow with a 1/4-inch port and 100 to 240V AC/DC operation

  • TypeDrain Components
  • MaterialHAWA
  • Normally closed design prevents flow until energised
  • Brass body resists corrosion in fluid systems
  • 300 psi air pressure rating handles demanding applications
  • Wide 100 to 240V AC/DC supply simplifies wiring
  • 52 Cv coefficient delivers efficient flow control

Brass solenoid valve for fluid control

The Red Hat 8262R202 is a two-way solenoid valve designed for drain and trap applications. Its normally closed configuration stops flow until the coil is energised. The brass body resists corrosion in water and air systems. Installers and maintenance engineers use it where reliable on-off control is required.

1/4 inch nominal pipe size with 5/32 inch orifice

The valve connects to 1/4 inch nominal piping and has an orifice diameter of 5/32 inch. This combination determines the flow capacity and the pressure drop across the valve. Matching these dimensions to the existing line is the single specification that decides whether the part fits the installation.

Handles air and inert gas up to 300 psi

The maximum operating pressure differential for air and inert gas is 300 psi, with a flow coefficient of 0.52 Cv. The NBR seals and 100 to 240V AC/DC coil suit a wide range of control voltages. The unit is not rated for fuel gas or fuel oil service, so those applications need a different valve.

Highlights

  • Normally closed design prevents flow until energised
  • Brass body resists corrosion in fluid systems
  • 300 psi air pressure rating handles demanding applications
  • Wide 100 to 240V AC/DC supply simplifies wiring
  • 52 Cv coefficient delivers efficient flow control

Specifications

TypeDrain Components
MaterialHAWA
BrandRed Hat
Model8262R202

Questions about this item

How does the 0.52 Cv flow coefficient perform in a real system?

The 0.52 Cv rating means the valve passes roughly half a gallon per minute of water with a one psi pressure drop, so size your piping and pump accordingly for the required flow rate.

What does the 100 to 240V AC/DC coil rating limit in practice?

The wide voltage range lets the coil operate on common control voltages worldwide without a transformer, but the 300 psi maximum pressure differential remains the hard limit for air or inert gas service.

What mounting space does the 1/4 inch brass body need?

The valve uses a 1/4 inch NPT thread on a brass body with a 5/32 inch orifice, so allow clearance for the coil enclosure and watertight housing when installing in a panel or manifold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.