We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve with coil, 3/8 inch ports, 120V AC, IP65 rated

Red Hat

Red Hat 8215G010 Solenoid Valve 2-Way 3/8 in NPTF 120V AC 0-50 psi

SKU CH-R1YK-340PN MPN 8215G010

Direct-acting 2-way solenoid valve controls air, water and inert gas flow at 0 to 50 psi with 120V AC actuation and IP65 protection

  • TypeDrain Components
  • Direct-acting design gives reliable on/off control at 0-50 psi
  • Normally closed operation stops flow until 120V AC energises the coil
  • Aluminium body with IP65 rating resists dust and water ingress
  • 3/8 in NPTF ports suit standard plumbing connections
  • Operates from 32°F to 125°F ambient and up to 125°F fluid temperature

2-Way Solenoid Valve for Fluid Control

The Red Hat 8215G010 is a normally closed, direct-acting solenoid valve built to manage air, water, inert gases, and fuel gas. Its 3/8 in NPTF ports suit industrial plumbing and automation systems needing reliable on-off flow control at low differential pressures.

Thermals Noise and Power Draw

The aluminum body operates in ambient temperatures from 32°F to 125°F with fluid temperatures up to 125°F. The 120V AC coil draws power only during actuation, producing minimal heat and no audible fan noise. An IP65 rating protects internal components from dust and water ingress in harsh environments.

Aluminum Body and IP65 Rating

The lightweight aluminum construction resists corrosion while keeping installation weight low. IP65 sealing allows outdoor mounting without extra enclosures. The 3/4 in orifice and 0 to 50 psi differential range cover common drain, trap, and fuel-gas applications without requiring oversized piping.

Highlights

  • Direct-acting design gives reliable on/off control at 0-50 psi
  • Normally closed operation stops flow until 120V AC energises the coil
  • Aluminium body with IP65 rating resists dust and water ingress
  • 3/8 in NPTF ports suit standard plumbing connections
  • Operates from 32°F to 125°F ambient and up to 125°F fluid temperature

Specifications

TypeDrain Components
BrandRed Hat
Model8215G010

Questions about this item

How do I install the Red Hat 8215G010 solenoid valve and which wiring step is most often missed?

Thread the 3/8 in NPTF ports into the pipeline using thread sealant, orient the valve so flow follows the arrow on the body, then connect the 120V AC coil leads; the step most often missed is tightening the coil retaining nut to compress the IP65 seal before energising.

What maintenance or replacement will the 8215G010 need after extended service?

Inspect the plunger and spring for wear every 12 months; replace the complete coil assembly if the valve fails to close at 0 psi differential, and renew the internal seals if external leakage appears at the 3/8 in ports.

What operating limit appears first when the valve runs continuously at the top of its pressure range?

The coil temperature rise hits the 125°F fluid-temperature ceiling before the 50 psi pressure rating is exceeded, so sustained duty at 50 psi requires adequate ventilation to keep the media below 125°F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.