We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
RVS backup camera system with 7 in monitor and 66 ft cable

Rear View Safety/Rvs Systems

Rear View Safety RVS-770619-NM CCD Backup Camera System 130 deg 7 in 410K 66 ft traffic safety equipment

SKU CH-Q8H0-EC2VP

A 7-inch CCD backup camera system with 130-degree view and 410K resolution includes a 66-foot wired extension cable and universal 9-32V DC power harness for traffic safety

  • ColorTransparent
  • 130° wide view reduces blind spots for safer manoeuvres
  • 410K CCD sensor delivers clear low-light images
  • 7 inch monitor shows real-time rear view
  • 66 ft cable reaches across large vehicles and trailers
  • 9–32 V DC power works on cars, trucks and equipment

Purpose-built visibility aid

This wired backup camera system uses a 1/4-inch Sharp colour CCD sensor delivering 410K resolution across a 130-degree field of view. The 7-inch monitor connects through a 66-foot extension cable and a three-port power harness that accepts 9-32V DC, making it suitable for universal vehicle fitment. A remote control and screw kit are included for straightforward installation.

Stable low-voltage operation

Power draw remains modest within the 9-32V DC range, so the unit runs without stressing vehicle electrical systems during normal driving. The wired connection eliminates wireless interference and the associated signal drops that can cause momentary picture loss. No cooling fan is present, so cabin noise is unaffected by the camera system.

Consistent image under continuous use

The CCD sensor maintains steady output during extended reversing manoeuvres or prolonged trailer monitoring without the thermal drift that can affect some imagers. Fixed wiring ensures the video feed does not degrade over time as battery-powered wireless links might. The 130-degree view remains constant regardless of how long the system stays powered.

Highlights

  • 130° wide view reduces blind spots for safer manoeuvres
  • 410K CCD sensor delivers clear low-light images
  • 7 inch monitor shows real-time rear view
  • 66 ft cable reaches across large vehicles and trailers
  • 9–32 V DC power works on cars, trucks and equipment

Specifications

ColorTransparent
BrandREAR VIEW SAFETY/RVS SYSTEMS

Questions about this item

How do I install the 66 ft extension cable and 3-port power harness for the RVS-770619-NM system?

Route the 66 ft cable from the rear-mounted camera to the front monitor, avoiding moving parts and sharp edges. Connect the camera to one harness port, the monitor to another, and the power wire to a 9-32V DC source; the third port remains unused unless adding a second camera.

What maintenance will the 1/4 in Sharp Color CCD image sensor and 7 in monitor need over time?

Clean the camera lens and monitor screen periodically with a soft, dry cloth to maintain the 410K resolution image. Inspect the 66 ft cable and power connections for corrosion or damage, especially after winter or heavy equipment use.

At what point does the 9-32V DC operating range become a limit during sustained operation?

If vehicle voltage drops below 9V during extended cranking or heavy accessory load, the camera and monitor will shut down. Sustained voltage above 32V from a faulty regulator can also damage the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.