Ranco
Ranco V6-412080-170 Heat Pump Reversing Valve Brass 4-Way HVAC Control
Four-way brass reversing valve directs refrigerant flow in heat-pump systems up to 690 psi and 158 °F
- Reverses refrigerant flow for heat-pump operation with four-way brass body
- Withstands up to 690 psi working pressure for reliable system performance
- Operates from 0 to 158 °F across heating and cooling modes
- Pilot valve included simplifies installation and control integration
- Leakage limited to 4 000 cc/min maximum for efficient operation
Heat pump reversing valve
The Ranco V6-412080-170 is a four-way reversing valve built for heat pump systems. Its brass body handles refrigerants including CFC, HCFC and HFC types. The valve operates between 0 and 690 psi with a maximum temperature rating of 158 degrees Fahrenheit. A pilot valve is included while the solenoid coil is supplied separately.
HVAC technicians and system installers
This component suits professionals servicing or assembling heat pump units that require a four-way flow pattern. The centered discharge tube configuration and socket-weld connection demand compatible piping layout. Installers needing a different port arrangement or an integrated solenoid coil should evaluate alternative valve designs.
690 psi maximum operating pressure
The pressure ceiling of 690 psi determines whether the valve matches the system's design limits. Exceeding this rating risks leakage or failure, while lower-pressure circuits may not require this capacity. Verify the heat pump's operating envelope against this figure before specifying the part.
Highlights
- Reverses refrigerant flow for heat-pump operation with four-way brass body
- Withstands up to 690 psi working pressure for reliable system performance
- Operates from 0 to 158 °F across heating and cooling modes
- Pilot valve included simplifies installation and control integration
- Leakage limited to 4 000 cc/min maximum for efficient operation
Specifications
| Brand | RANCO |
|---|
Questions about this item
What operating pressure range does the 4-way reversing valve handle?
The valve operates from 0 psi up to a maximum of 690 psi, so it suits typical heat-pump refrigerant circuits within that window.
What discharge connection size and type must the piping match?
The discharge port is a 1/2 in socket-weld connection with a centered tube configuration, so copper tubing must be prepared for that exact fit.
Does the unit come with a solenoid coil, and how is the pilot valve installed?
A pilot valve is included but the solenoid coil is not; the pilot valve threads into the valve body first, then the coil slides over it — skipping the coil leaves the valve inoperable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
