Raion Power
Raion Power RG1223T1 12V 2.3Ah standard battery for Abbott Omni Flow 4000
12 V 2.3 Ah sealed lead-acid battery powers the Abbott Omni Flow 4000 with AGM maintenance-free design and voltage-matched cells
- TypeRechargeable Batteries
- Battery Pack1-pack
- Battery TypeSealed Lead Acid
- Battery Capacity2300 mAh
- Battery Voltage12V
- 12 V 2.3 Ah powers Abbott Omni Flow 4000 reliably
- Sealed lead-acid AGM design requires no maintenance
- Rugged ABS casing resists shock vibration chemicals heat
- U.L. recognised CE rated ISO 9001 factory quality
- Voltage-matched same-batch cells extend performance longevity
Replacement Battery for Omni Flow 4000
This Raion Power RG1223T1 is a 12V 2.3Ah sealed lead acid battery built as a direct replacement for the Abbott Laboratories Omni Flow 4000. It uses AGM maintenance free technology and arrives factory fresh. The rugged ABS casing resists shock, vibration, chemicals and heat.
Suits Omni Flow 4000 Only
This unit fits the Omni Flow 4000 and matches its voltage and capacity requirements. Buyers who need a different voltage, a higher capacity, or a battery for another device model should look elsewhere. Multiple units ordered together are voltage matched from the same batch.
12V 2.3Ah Capacity Decides Fit
The single specification that determines compatibility is the 12V 2.3Ah rating. If the Omni Flow 4000 requires exactly this voltage and capacity, the RG1223T1 will work. If the device needs any other rating, this battery is not the correct part.
Highlights
- 12 V 2.3 Ah powers Abbott Omni Flow 4000 reliably
- Sealed lead-acid AGM design requires no maintenance
- Rugged ABS casing resists shock vibration chemicals heat
- U.L. recognised CE rated ISO 9001 factory quality
- Voltage-matched same-batch cells extend performance longevity
Specifications
| Brand | Raion Power |
|---|---|
| Model | RG1223T1 |
| Type | Rechargeable Batteries |
| Battery Pack | 1-pack |
| Battery Type | Sealed Lead Acid |
| Battery Capacity | 2300 mAh |
| Battery Voltage | 12V |
Questions about this item
Does my Abbott Omni Flow 4000 already need to accept a 12V 2.3Ah sealed lead-acid pack?
Yes, the RG1223T1 is a direct 12V 2.3Ah replacement for the Abbott Omni Flow 4000, so the device must be designed for that voltage and capacity.
Can I keep using the original charger that came with my Omni Flow 4000?
The battery uses standard sealed lead-acid chemistry, so the existing Omni Flow 4000 charger that supports 12V SLA packs will continue to work.
How do I confirm the RG1223T1 is performing correctly after installation?
Verify the Omni Flow 4000 powers on and runs on battery alone, and check that the device’s own battery indicator shows a full charge after the initial charge cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



