Radnor
Radnor RAD64002689 Copper Nozzle Series 2362 5/8 in Bore
Copper welding nozzle with 5/8 inch bore, series 2362, self-insulated for Tweco guns
- TypeWelding Parts & Supplies
- Copper construction ensures excellent heat conductivity for consistent weld quality
- Series 2362 design fits Tweco-style MIG guns for direct compatibility
- 5/8 inch bore diameter provides optimal gas coverage for clean welds
- Self-insulated nozzle reduces spatter adhesion and extends consumable life
- New condition guarantees full performance from first use
Radnor Series 2362 Copper Nozzle
The Radnor Series 2362 is a copper welding nozzle with a 5/8 in bore diameter. It is manufactured as a self-insulated Tweco style component for MIG welding guns. The part carries the manufacturer number RAD64002689 and is supplied new.
Suits welders using Tweco-style guns needing a 5/8
This nozzle fits operators running compatible Tweco-style MIG guns that accept Series 2362 consumables. Buyers whose equipment requires a different bore size, thread pattern or insulation style should look at other parts.
Bore diameter 5/8 in decides fit
The 5/8 in bore diameter is the critical specification that determines whether this nozzle matches the contact tip and gas diffuser in your gun. Verify the required bore size against your gun manual before ordering.
Highlights
- Copper construction ensures excellent heat conductivity for consistent weld quality
- Series 2362 design fits Tweco-style MIG guns for direct compatibility
- 5/8 inch bore diameter provides optimal gas coverage for clean welds
- Self-insulated nozzle reduces spatter adhesion and extends consumable life
- New condition guarantees full performance from first use
Specifications
| Brand | RADNOR |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
How do I install the Series 2362 copper nozzle onto my Tweco gun, and what step is often missed?
Thread the self-insulated nozzle onto the Tweco gun diffuser until it seats firmly; the step often missed is verifying the diffuser is clean and undamaged so the nozzle makes full electrical contact.
What maintenance or replacement will the copper nozzle need over time?
Inspect the 5/8 in bore regularly for spatter buildup and erosion; replace the nozzle when the bore diameter widens or the copper tip deforms, which degrades gas coverage.
What limit appears first when the nozzle runs at high amperage for extended periods?
Heat buildup in the copper body is the first limit; prolonged high-amperage use softens the material and accelerates bore wear, requiring more frequent replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
