QSFPTEK
QSFPTEK 2Pack 10GBASE-LR SFP+ 1310nm 10km LC DDM 2 in 1 accessory
Two-pack of 10GBASE-LR SFP+ transceivers with LC duplex connectors, 1310nm wavelength and 10km reach on single-mode fibre
- 10 Gb/s throughput over 10 km single-mode fibre
- Works with Cisco, Ubiquiti, Netgear, MikroTik, QNAP and other SFP+ gear
- DDM monitoring reveals link health in real time
- Hot-pluggable LC module installs without tools or downtime
- Each transceiver tested on multiple switches before shipping
Dual 10G SFP+ LR transceivers
This two-pack provides a pair of 10GBASE-LR SFP+ modules built for single-mode fibre links up to 10 kilometres. Each unit uses a 1310 nanometre wavelength and a duplex LC connector to deliver 10 gigabit per second throughput in switches, routers, NICs or NAS appliances with SFP+ ports.
Network engineers extending campus or metro links
The modules suit teams that need hot-pluggable, DDM-capable optics for 10-kilometre single-mode runs across multi-vendor gear including Cisco, Ubiquiti, Mikrotik, QNAP, Netgear and D-Link. Installations requiring multi-mode fibre, shorter-reach SR optics or speeds beyond 10 gigabits per second cannot use these transceivers.
10-kilometre single-mode reach
The defining parameter is the 10-kilometre transmission distance on 1310 nanometre single-mode fibre with Tx power between minus 6.5 and minus 0.5 dBm and receiver sensitivity of minus 14.4 dBm. If the link budget or distance requirement differs, another optic class is required.
Highlights
- 10 Gb/s throughput over 10 km single-mode fibre
- Works with Cisco, Ubiquiti, Netgear, MikroTik, QNAP and other SFP+ gear
- DDM monitoring reveals link health in real time
- Hot-pluggable LC module installs without tools or downtime
- Each transceiver tested on multiple switches before shipping
Specifications
No published specifications for this item yet.
Questions about this item
What type of switch port do I need to insert these 10GBASE-LR SFP+ modules into?
You need a 10Gb SFP+ port on a switch, router, NIC or server that accepts single-mode duplex LC transceivers.
Will these modules work with my existing single-mode fiber patch cables that have LC connectors?
Yes, the duplex LC connector on each module mates directly with standard single-mode LC patch cables for 1310 nm operation.
How can I confirm the transceivers are operating within specification after installation?
Enable DDM monitoring on your switch to read real-time Tx power between -6.5 and -0.5 dBm and Rx sensitivity around -14.4 dBm.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
