We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black and silver 6x9 three-way coaxial car speakers

Pyle TS-F6935R 6x9 3-way coaxial car speaker pair 230W peak 30W RMS 87dB black silver

SKU CH-ZB4D-J1ETV MPN TS-F6935R

Pair of 6x9 three-way coaxial car speakers handling 230W peak and 10W RMS with 87dB sensitivity

  • ColorBlack
  • Peak Power30 Watts
  • RMS Power10 Watts
  • Mounting Depth2.75 L x 9.3 W x 6.4 H inches
  • Package Contain(2) 6" x 9" Speakers
  • Features(2) 6" x 9" Speakers
  • 3-way coaxial design covers lows, mids and highs for balanced sound
  • 230 W peak power handles loud passages without distortion
  • 87 dB sensitivity produces strong output with modest amplifier power
  • Standard 6 x 9 inch size fits most factory speaker openings
  • Passive construction lets you choose the amplifier that suits your system

What these speakers are

The Pyle TS-F6935R is a pair of 6 x 9 inch 3-way coaxial car speakers built for drivers who want a direct replacement that covers low, mid and high frequencies from a single mounting point. They handle 230 W peak and 30 W RMS at 4 ohms with an 87 dB sensitivity rating, so they play loudly with modest amplifier power. The passive design means an external amp or receiver is required.

Build and mounting implications

Each unit measures 2.75 inches deep, 9.3 inches wide and 6.4 inches high, matching the standard 6 x 9 cut-out found in many rear decks and door panels. The black and silver flush-mount finish sits cleanly against interior trim. Because the speakers are passive, you must run speaker wire from your amplifier to each location; professional installation is recommended if you are unfamiliar with car audio wiring.

Thermals, noise and power in use

With 30 W RMS continuous handling, the voice coils stay cool at normal listening levels and the 87 dB sensitivity keeps amplifier gain low, reducing hiss. The 3-way layout spreads energy across woofer, midrange and tweeter, so no single driver is overdriven during typical music playback. Peak capability of 230 W covers short transients without thermal compression.

Highlights

  • 3-way coaxial design covers lows, mids and highs for balanced sound
  • 230 W peak power handles loud passages without distortion
  • 87 dB sensitivity produces strong output with modest amplifier power
  • Standard 6 x 9 inch size fits most factory speaker openings
  • Passive construction lets you choose the amplifier that suits your system

Specifications

BrandPYLE
ModelTS-F6935R
ColorBlack
Part NumberTS-F6935R
Peak Power30 Watts
RMS Power10 Watts
Mounting Depth2.75 L x 9.3 W x 6.4 H inches
Package Contain(2) 6" x 9" Speakers
Features(2) 6" x 9" Speakers

Questions about this item

What power level does the 4-ohm impedance cap in practice?

The 4-ohm impedance works with the 30 W RMS continuous rating; the 230 W peak figure is a short-term maximum, not a continuous power level.

What are the exact mounting dimensions for the 6x9 cutout?

The speakers need a 6.4-inch height, 9.3-inch width and 2.75-inch mounting depth to fit the standard 6x9 opening.

How do I wire the passive crossover and which step is often missed?

Connect the amplifier to the speaker terminals only; the built-in crossover splits the signal internally, but many installers forget to set the amp gain to match the 30 W RMS limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.