METRA 82-SU1 speaker adapter and wire harness kit 6.5-6.75 in car electronics accessory
- Speaker Spacers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pyle
A pair of waterproof 8-inch marine speakers delivering 180 W peak and 90 W RMS with 91 dB sensitivity
This pair of Pyle PLMR80B speakers is built for boats, off-road vehicles and automobiles that need water-resistant audio. Each driver uses an 8-inch polypropylene cone with a rubber surround and a dual-cone tweeter mounted on a 1.5-inch aluminum voice coil. A 20 oz. circuit magnet and molded ABS basket with integrated grill complete the weatherproof assembly.
Buyers who want a direct OEM-size replacement with 90 watts RMS and 180 watts peak power will find the 4-ohm impedance and 91 dB sensitivity a practical match for marine amplifiers. Systems that require a separate tweeter crossover, component-style imaging or sub-bass extension below 40 Hz should look at alternative designs.
The speakers need a 3.54-inch mounting depth and a 7.36-inch diameter cut-out; verify your panels can accommodate both dimensions. Confirm the amplifier or head unit can drive a 4-ohm load at the stated power levels. Ensure wiring routes stay clear of water ingress points in the target location.
| Brand | Pyle |
|---|---|
| Type | Marine Component Speakers |
| Speaker Size | 8" |
| Model | PLMR80B |
| Vehicle Type | Marine, Automobile, Off-Road |
| Color | Black |
| Woofer Material | Polypropylene Cone |
| Surround Material | Rubber |
| Tweeter | Dual Cone |
| Voice Coil | 1.5-inch Aluminum |
| Magnet Construction | 20 oz. Circuit Magnet |
| Frame Construction | Molded ABS Basket and Grill |
| Part Number | PLMR80B |
| Peak Power | 180 Watts |
| RMS Power | 90 Watts |
| Sensitivity | 91 dB |
| Frequency Response | 40Hz – 18kHz |
| Impedance | 4 Ohms |
| Mounting Depth | 3.54 inches |
| Cut-out Dimensions | 7.36 inches |
| Features | Waterproof construction for marine environments. Full-range stereo sound with dual cone design. Polypropylene cone and rubber surround for durability. Universal OEM replacement size for easy installation. Heavy-duty molded ABS basket and grill for lasting performance. |
| Package Contain | (2) Marine Component Speakers Speaker Wire Mounting Hardware |
An amplifier rated around 90 W RMS per channel at 4 Ω will match the speakers' continuous power handling.
Yes, most marine head units are designed for 4 Ω loads and the 91 dB sensitivity means they will play loudly with typical built-in amplifier power.
Play a test tone sweep from 40 Hz to 18 kHz and listen for smooth output across the range without distortion at moderate volume.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?